Every card in the Meshroom S
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the SSUPD Meshroom S V2?
Tight
Yes, but it's tight: only 1.4 mm of thickness to spare.
Length320 of 332 mm12 mm spare
Height120.3 of 153 mm32.8 mm spare
Thickness61.6 of 63 mm1.4 mm spare
Exact measurements
| Size | Sapphire | Meshroom S | Room |
|---|---|---|---|
| Length | 320 mm | 332 mm | 12 mm spare |
| Height | 120.3 mm | 153 mm | 32.8 mm spare |
| Thickness | 61.6 mm | 63 mm | 1.4 mm spare |
Rear position, 3-slot mode, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the SSUPD Meshroom S V2?
- Yes, but it's tight: only 1.4 mm of thickness to spare. Length 320 of 332 mm, height 120.3 of 153 mm, thickness 61.6 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: Sapphire’s spec page, checked October 23, 2026.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- Cooler Master NR200P V2Fits14 mm of length to spare
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- Sliger CerberusFits10 mm of length to spare
Other RX 9070 XT cards in the Meshroom S
- PowerColor Reaper Radeon RX 9070 XTFits28 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTFits13 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits20 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCTightOnly 2 mm of length to spare
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits44 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCTightOnly 1.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.