Every card in the Cerberus
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the Sliger Cerberus?
Fits
Yes. The Sapphire Pulse Radeon RX 9070 XT fits the Sliger Cerberus with 10 mm of length to spare.
Length320 of 330 mm10 mm spare
Height120.3 of 150 mm29.8 mm spare
Thickness3 slotsNot published
Exact measurements
| Size | Sapphire | Cerberus | Room |
|---|---|---|---|
| Length | 320 mm | 330 mm | 10 mm spare |
| Height | 120.3 mm | 150 mm | 29.8 mm spare |
| Thickness | 3 slots | — | Not published |
Sliger's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the Sliger Cerberus?
- Yes. The Sapphire Pulse Radeon RX 9070 XT fits the Sliger Cerberus with 10 mm of length to spare. Length 320 of 330 mm, height 120.3 of 150 mm, thickness 3 slots (no published limit).
- Is anything not checked?
- Sliger doesn't publish a thickness limit for the Cerberus, so that isn't checked.
- Where do these numbers come from?
- Sliger's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Sliger’s Cerberus specifications, checked October 24, 2026. Sliger lists cards up to 330 mm long and 150 mm tall in five expansion slots.
- Card: Sapphire’s spec page, checked October 23, 2026.
- Sliger discontinued the Cerberus on July 31, 2025.
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- Cooler Master NR200P V2Fits14 mm of length to spare
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the Cerberus
- PowerColor Reaper Radeon RX 9070 XTFits26 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit10 mm too long
- ASUS Prime Radeon RX 9070 XT OCFits18 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCTightNo length to spare (330 of 330 mm)
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits42 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit0.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.