Every card in the T1
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the FormD T1 V2.5?
Tight
Yes, but it's tight: only 5 mm of length to spare; no thickness to spare (3 of 3 slots); a 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only).
Length320 of 325 mm5 mm spare
Height120.3 of 140 mm19.8 mm spare
Thickness3 of 3 slots0 slots spare
Exact measurements
| Size | Sapphire | T1 | Room |
|---|---|---|---|
| Length | 320 mm | 325 mm | 5 mm spare |
| Height | 120.3 mm | 140 mm | 19.8 mm spare |
| Thickness | 3 slots | 3 slots | 0 slots spare |
Set for a 3-slot card, leaving 53 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the FormD T1 V2.5?
- Yes, but it's tight: only 5 mm of length to spare; no thickness to spare (3 of 3 slots); a 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only). Length 320 of 325 mm, height 120.3 of 140 mm, thickness 3 of 3 slots.
- Which T1 layout does it need?
- A 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only).
- Where do these numbers come from?
- NCASE's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: Sapphire’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- Cooler Master NR200P V2Fits14 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- Sliger CerberusFits10 mm of length to spare
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the T1
- PowerColor Reaper Radeon RX 9070 XTFits21 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit15 mm too long
- ASUS Prime Radeon RX 9070 XT OCFits13 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit5 mm too long
- Gigabyte Radeon RX 9070 XT Gaming OC 16GTightA 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only)
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit5.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.