Every card in the T1
Will it fit
Does the ASUS Prime Radeon RX 9070 XT OC fit in the FormD T1 V2.5?
Fits
Yes. The ASUS Prime Radeon RX 9070 XT OC fits the FormD T1 V2.5 with 13 mm of length to spare.
Length312 of 325 mm13 mm spare
Height130 of 140 mm10 mm spare
Thickness2.5 of 2.75 slots0.25 slots spare
Exact measurements
| Size | ASUS | T1 | Room |
|---|---|---|---|
| Length | 312 mm | 325 mm | 13 mm spare |
| Height | 130 mm | 140 mm | 10 mm spare |
| Thickness | 2.5 slots | 2.75 slots | 0.25 slots spare |
Set for a 2.75-slot card, leaving 58 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the ASUS Prime Radeon RX 9070 XT OC fit in the FormD T1 V2.5?
- Yes. The ASUS Prime Radeon RX 9070 XT OC fits the FormD T1 V2.5 with 13 mm of length to spare. Length 312 of 325 mm, height 130 of 140 mm, thickness 2.5 of 2.75 slots.
- Which T1 layout does it need?
- Set for a 2.75-slot card, which leaves 58 mm for the CPU cooler.
- Where do these numbers come from?
- NCASE's published spec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: ASUS’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PFits18 mm of length to spare
- Cooler Master NR200P V2Fits22 mm of length to spare
- Fractal Design Era 2Fits14 mm of length to spare
- Fractal Design RidgeDoesn’t fit5 mm too tall
- Fractal Design TerraFits10 mm of length to spare
- Jonsbo Z20Fits51 mm of length to spare
- Lian Li A3-mATXFits103 mm of length to spare
- Lian Li A4-H2OFits10 mm of length to spare
- Lian Li Q58TightOnly 8 mm of length to spare
- NCASE M1 V6.1Doesn’t fit5 mm too tall
- NCASE M2Fits47 mm of length to spare
- Phanteks Evolv Shift XTFits12 mm of length to spare
- SilverStone SG13Doesn’t fit42 mm too long
- Sliger CerberusFits18 mm of length to spare
- SSUPD Meshroom S V2Fits20 mm of length to spare
Other RX 9070 XT cards in the T1
- PowerColor Reaper Radeon RX 9070 XTFits21 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit15 mm too long
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit5 mm too long
- Gigabyte Radeon RX 9070 XT Gaming OC 16GTightA 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only)
- Sapphire Pulse Radeon RX 9070 XTTightOnly 5 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit5.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.