Every card in the Meshroom S
Will it fit
Does the ASUS Prime Radeon RX 9070 XT OC fit in the SSUPD Meshroom S V2?
Fits
Yes. The ASUS Prime Radeon RX 9070 XT OC fits the SSUPD Meshroom S V2 with 20 mm of length to spare.
Length312 of 332 mm20 mm spare
Height130 of 153 mm23 mm spare
Thickness50 of 63 mm13 mm spare
Exact measurements
| Size | ASUS | Meshroom S | Room |
|---|---|---|---|
| Length | 312 mm | 332 mm | 20 mm spare |
| Height | 130 mm | 153 mm | 23 mm spare |
| Thickness | 50 mm | 63 mm | 13 mm spare |
Rear position, 3-slot mode, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the ASUS Prime Radeon RX 9070 XT OC fit in the SSUPD Meshroom S V2?
- Yes. The ASUS Prime Radeon RX 9070 XT OC fits the SSUPD Meshroom S V2 with 20 mm of length to spare. Length 312 of 332 mm, height 130 of 153 mm, thickness 50 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: ASUS’s spec page, checked October 23, 2026.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PFits18 mm of length to spare
- Cooler Master NR200P V2Fits22 mm of length to spare
- FormD T1 V2.5Fits13 mm of length to spare
- Fractal Design Era 2Fits14 mm of length to spare
- Fractal Design RidgeDoesn’t fit5 mm too tall
- Fractal Design TerraFits10 mm of length to spare
- Jonsbo Z20Fits51 mm of length to spare
- Lian Li A3-mATXFits103 mm of length to spare
- Lian Li A4-H2OFits10 mm of length to spare
- Lian Li Q58TightOnly 8 mm of length to spare
- NCASE M1 V6.1Doesn’t fit5 mm too tall
- NCASE M2Fits47 mm of length to spare
- Phanteks Evolv Shift XTFits12 mm of length to spare
- SilverStone SG13Doesn’t fit42 mm too long
- Sliger CerberusFits18 mm of length to spare
Other RX 9070 XT cards in the Meshroom S
- PowerColor Reaper Radeon RX 9070 XTFits28 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTFits13 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCTightOnly 2 mm of length to spare
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits44 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTTightOnly 1.4 mm of thickness to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCTightOnly 1.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.