Every card in the Meshroom S
Will it fit
Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the SSUPD Meshroom S V2?
Fits
Yes. The Gigabyte Radeon RX 9070 XT Gaming OC 16G fits the SSUPD Meshroom S V2 with 44 mm of length to spare.
Length288 of 332 mm44 mm spare
Height132 of 153 mm21 mm spare
Thickness56 of 63 mm7 mm spare
Exact measurements
| Size | Gigabyte | Meshroom S | Room |
|---|---|---|---|
| Length | 288 mm | 332 mm | 44 mm spare |
| Height | 132 mm | 153 mm | 21 mm spare |
| Thickness | 56 mm | 63 mm | 7 mm spare |
Rear position, 3-slot mode, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the SSUPD Meshroom S V2?
- Yes. The Gigabyte Radeon RX 9070 XT Gaming OC 16G fits the SSUPD Meshroom S V2 with 44 mm of length to spare. Length 288 of 332 mm, height 132 of 153 mm, thickness 56 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PFits42 mm of length to spare
- Cooler Master NR200P V2Fits46 mm of length to spare
- FormD T1 V2.5TightA 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only)
- Fractal Design Era 2TightOnly 2 mm of thickness to spare
- Fractal Design RidgeDoesn’t fit7 mm too tall
- Fractal Design TerraTightOnly 1 mm of thickness to spare
- Jonsbo Z20Fits75 mm of length to spare
- Lian Li A3-mATXFits127 mm of length to spare
- Lian Li A4-H2OFits34 mm of length to spare
- Lian Li Q58Fits32 mm of length to spare
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits71 mm of length to spare
- Phanteks Evolv Shift XTFits36 mm of length to spare
- SilverStone SG13Doesn’t fit18 mm too long
- Sliger CerberusFits42 mm of length to spare
Other RX 9070 XT cards in the Meshroom S
- PowerColor Reaper Radeon RX 9070 XTFits28 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTFits13 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits20 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCTightOnly 2 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTTightOnly 1.4 mm of thickness to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCTightOnly 1.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.