Every card in the NR200P V2
Will it fit
Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the Cooler Master NR200P V2?
Fits
Yes. The Gigabyte Radeon RX 9070 XT Gaming OC 16G fits the Cooler Master NR200P V2 with 46 mm of length to spare.
Length288 of 334 mm46 mm spare
Height132 of 160 mm28 mm spare
Thickness56 of 80 mm24 mm spare
Exact measurements
| Size | Gigabyte | NR200P V2 | Room |
|---|---|---|---|
| Length | 288 mm | 334 mm | 46 mm spare |
| Height | 132 mm | 160 mm | 28 mm spare |
| Thickness | 56 mm | 80 mm | 24 mm spare |
Card inside the front bracket, leaving 67 mm for the CPU cooler.
Cooler Master's published spec, not yet measured by Respec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the Cooler Master NR200P V2?
- Yes. The Gigabyte Radeon RX 9070 XT Gaming OC 16G fits the Cooler Master NR200P V2 with 46 mm of length to spare. Length 288 of 334 mm, height 132 of 160 mm, thickness 56 of 80 mm.
- Which NR200P V2 layout does it need?
- Card inside the front bracket, which leaves 67 mm for the CPU cooler.
- Where do these numbers come from?
- Cooler Master's published spec, not yet measured by Respec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
This card in other small cases
- Cooler Master NR200PFits42 mm of length to spare
- FormD T1 V2.5TightA 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only)
- Fractal Design Era 2TightOnly 2 mm of thickness to spare
- Fractal Design RidgeDoesn’t fit7 mm too tall
- Fractal Design TerraTightOnly 1 mm of thickness to spare
- Jonsbo Z20Fits75 mm of length to spare
- Lian Li A3-mATXFits127 mm of length to spare
- Lian Li A4-H2OFits34 mm of length to spare
- Lian Li Q58Fits32 mm of length to spare
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits71 mm of length to spare
- Phanteks Evolv Shift XTFits36 mm of length to spare
- SilverStone SG13Doesn’t fit18 mm too long
- Sliger CerberusFits42 mm of length to spare
- SSUPD Meshroom S V2Fits44 mm of length to spare
Other RX 9070 XT cards in the NR200P V2
- PowerColor Reaper Radeon RX 9070 XTFits30 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTFits17 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits22 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCFits27 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTFits14 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCFits26.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.