Every card in the M1
Will it fit
Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the NCASE M1 V6.1?
Doesn’t fit
No. The Gigabyte Radeon RX 9070 XT Gaming OC 16G is only 2 mm of length to spare and 2 mm too tall for the NCASE M1 V6.1.
Length288 of 290 mm2 mm spare
Height132 of 130 mm2 mm over
Thickness56 of 60 mm4 mm spare
Exact measurements
| Size | Gigabyte | M1 | Room |
|---|---|---|---|
| Length | 288 mm | 290 mm | 2 mm spare |
| Height | 132 mm | 130 mm | 2 mm over |
| Thickness | 56 mm | 60 mm | 4 mm spare |
NCASE's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the NCASE M1 V6.1?
- No. The Gigabyte Radeon RX 9070 XT Gaming OC 16G is only 2 mm of length to spare and 2 mm too tall for the NCASE M1 V6.1. Length 288 of 290 mm, height 132 of 130 mm, thickness 56 of 60 mm.
- Where do these numbers come from?
- NCASE's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s M1 specifications, checked October 24, 2026. NCASE lists 280 mm for cards up to 60 mm (3 slots) thick, 290 mm with the front I/O ports removed, and 322 mm for cards up to 45 mm (2.2 slots). Height is 140 mm mid-card, 130 mm at the back corner and 125 mm past 280 mm of length; we use the corner figures.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- NCASE asks for 15 to 20 mm above the card for PCIe power connectors.
- A 25 mm bottom fan limits the card to 2 slots (42 mm); a 15 mm fan to 2.5 slots (50 mm).
This card in other small cases
- Cooler Master NR200PFits42 mm of length to spare
- Cooler Master NR200P V2Fits46 mm of length to spare
- FormD T1 V2.5TightA 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only)
- Fractal Design Era 2TightOnly 2 mm of thickness to spare
- Fractal Design RidgeDoesn’t fit7 mm too tall
- Fractal Design TerraTightOnly 1 mm of thickness to spare
- Jonsbo Z20Fits75 mm of length to spare
- Lian Li A3-mATXFits127 mm of length to spare
- Lian Li A4-H2OFits34 mm of length to spare
- Lian Li Q58Fits32 mm of length to spare
- NCASE M2Fits71 mm of length to spare
- Phanteks Evolv Shift XTFits36 mm of length to spare
- SilverStone SG13Doesn’t fit18 mm too long
- Sliger CerberusFits42 mm of length to spare
- SSUPD Meshroom S V2Fits44 mm of length to spare
Other RX 9070 XT cards in the M1
- PowerColor Reaper Radeon RX 9070 XTDoesn’t fit2 mm too tall
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit18 mm too long
- ASUS Prime Radeon RX 9070 XT OCDoesn’t fit5 mm too tall
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit8 mm too long
- Sapphire Pulse Radeon RX 9070 XTDoesn’t fitOnly 2 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit8.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.