Every card in the M1
Will it fit
Does the PowerColor Reaper Radeon RX 9070 XT fit in the NCASE M1 V6.1?
Doesn’t fit
No. The PowerColor Reaper Radeon RX 9070 XT is 2 mm too tall for the NCASE M1 V6.1.
Length304 of 322 mm18 mm spare
Height127 of 125 mm2 mm over
Thickness42 of 45 mm3 mm spare
Exact measurements
| Size | PowerColor | M1 | Room |
|---|---|---|---|
| Length | 304 mm | 322 mm | 18 mm spare |
| Height | 127 mm | 125 mm | 2 mm over |
| Thickness | 42 mm | 45 mm | 3 mm spare |
NCASE's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Reaper Radeon RX 9070 XT fit in the NCASE M1 V6.1?
- No. The PowerColor Reaper Radeon RX 9070 XT is 2 mm too tall for the NCASE M1 V6.1. Length 304 of 322 mm, height 127 of 125 mm, thickness 42 of 45 mm.
- Where do these numbers come from?
- NCASE's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s M1 specifications, checked October 24, 2026. NCASE lists 280 mm for cards up to 60 mm (3 slots) thick, 290 mm with the front I/O ports removed, and 322 mm for cards up to 45 mm (2.2 slots). Height is 140 mm mid-card, 130 mm at the back corner and 125 mm past 280 mm of length; we use the corner figures.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 304 x 127 x 42 mm with the bracket and 289 x 111 x 41 mm without; we use the larger figures.
- NCASE asks for 15 to 20 mm above the card for PCIe power connectors.
- A 25 mm bottom fan limits the card to 2 slots (42 mm); a 15 mm fan to 2.5 slots (50 mm).
This card in other small cases
- Cooler Master NR200PFits26 mm of length to spare
- Cooler Master NR200P V2Fits30 mm of length to spare
- FormD T1 V2.5Fits21 mm of length to spare
- Fractal Design Era 2Fits22 mm of length to spare
- Fractal Design RidgeDoesn’t fit2 mm too tall
- Fractal Design TerraFits18 mm of length to spare
- Jonsbo Z20Fits59 mm of length to spare
- Lian Li A3-mATXFits111 mm of length to spare
- Lian Li A4-H2OFits18 mm of length to spare
- Lian Li Q58Fits16 mm of length to spare
- NCASE M2Fits55 mm of length to spare
- Phanteks Evolv Shift XTFits20 mm of length to spare
- SilverStone SG13Doesn’t fit34 mm too long
- Sliger CerberusFits26 mm of length to spare
- SSUPD Meshroom S V2Fits28 mm of length to spare
Other RX 9070 XT cards in the M1
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit18 mm too long
- ASUS Prime Radeon RX 9070 XT OCDoesn’t fit5 mm too tall
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit8 mm too long
- Gigabyte Radeon RX 9070 XT Gaming OC 16GDoesn’t fitOnly 2 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTDoesn’t fitOnly 2 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit8.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.