Every card in the M1
Will it fit
Does the PowerColor Hellhound Radeon RX 9070 XT fit in the NCASE M1 V6.1?
Doesn’t fit
No. The PowerColor Hellhound Radeon RX 9070 XT is 18 mm too long and 17 mm too tall and 4 mm too thick for the NCASE M1 V6.1.
Length340 of 322 mm18 mm over
Height142 of 125 mm17 mm over
Thickness49 of 45 mm4 mm over
Exact measurements
| Size | PowerColor | M1 | Room |
|---|---|---|---|
| Length | 340 mm | 322 mm | 18 mm over |
| Height | 142 mm | 125 mm | 17 mm over |
| Thickness | 49 mm | 45 mm | 4 mm over |
NCASE's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Hellhound Radeon RX 9070 XT fit in the NCASE M1 V6.1?
- No. The PowerColor Hellhound Radeon RX 9070 XT is 18 mm too long and 17 mm too tall and 4 mm too thick for the NCASE M1 V6.1. Length 340 of 322 mm, height 142 of 125 mm, thickness 49 of 45 mm.
- Where do these numbers come from?
- NCASE's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s M1 specifications, checked October 24, 2026. NCASE lists 280 mm for cards up to 60 mm (3 slots) thick, 290 mm with the front I/O ports removed, and 322 mm for cards up to 45 mm (2.2 slots). Height is 140 mm mid-card, 130 mm at the back corner and 125 mm past 280 mm of length; we use the corner figures.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 340 x 142 x 49 mm with the bracket and 327 x 128 x 49 mm without; we use the larger figures.
- NCASE asks for 15 to 20 mm above the card for PCIe power connectors.
- A 25 mm bottom fan limits the card to 2 slots (42 mm); a 15 mm fan to 2.5 slots (50 mm).
This card in other small cases
- Cooler Master NR200PDoesn’t fit10 mm too long
- Cooler Master NR200P V2Fits17 mm of length to spare
- FormD T1 V2.5Doesn’t fit15 mm too long
- Fractal Design Era 2Doesn’t fit14 mm too long
- Fractal Design RidgeDoesn’t fit5 mm too long
- Fractal Design TerraDoesn’t fit18 mm too long
- Jonsbo Z20Fits23 mm of length to spare
- Lian Li A3-mATXFits75 mm of length to spare
- Lian Li A4-H2ODoesn’t fit18 mm too long
- Lian Li Q58Doesn’t fit20 mm too long
- NCASE M2Fits19 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit16 mm too long
- SilverStone SG13Doesn’t fit70 mm too long
- Sliger CerberusDoesn’t fit10 mm too long
- SSUPD Meshroom S V2Fits13 mm of length to spare
Other RX 9070 XT cards in the M1
- PowerColor Reaper Radeon RX 9070 XTDoesn’t fit2 mm too tall
- ASUS Prime Radeon RX 9070 XT OCDoesn’t fit5 mm too tall
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit8 mm too long
- Gigabyte Radeon RX 9070 XT Gaming OC 16GDoesn’t fitOnly 2 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTDoesn’t fitOnly 2 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit8.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.