Every card in the NR200P
Will it fit
Does the PowerColor Hellhound Radeon RX 9070 XT fit in the Cooler Master NR200P?
Doesn’t fit
No. The PowerColor Hellhound Radeon RX 9070 XT is 10 mm too long for the Cooler Master NR200P.
Length340 of 330 mm10 mm over
Height142 of 156 mm14 mm spare
Thickness49 of 60 mm11 mm spare
Exact measurements
| Size | PowerColor | NR200P | Room |
|---|---|---|---|
| Length | 340 mm | 330 mm | 10 mm over |
| Height | 142 mm | 156 mm | 14 mm spare |
| Thickness | 49 mm | 60 mm | 11 mm spare |
Cooler Master's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Hellhound Radeon RX 9070 XT fit in the Cooler Master NR200P?
- No. The PowerColor Hellhound Radeon RX 9070 XT is 10 mm too long for the Cooler Master NR200P. Length 340 of 330 mm, height 142 of 156 mm, thickness 49 of 60 mm.
- Where do these numbers come from?
- Cooler Master's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P specifications, checked October 24, 2026. Cooler Master lists 330 x 156 x 60 mm (triple slot) for the original NR200P; the length and height include the power connector.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 340 x 142 x 49 mm with the bracket and 327 x 128 x 49 mm without; we use the larger figures.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
- With the card mounted vertically the CPU cooler drops to 76 mm.
This card in other small cases
- Cooler Master NR200P V2Fits17 mm of length to spare
- FormD T1 V2.5Doesn’t fit15 mm too long
- Fractal Design Era 2Doesn’t fit14 mm too long
- Fractal Design RidgeDoesn’t fit5 mm too long
- Fractal Design TerraDoesn’t fit18 mm too long
- Jonsbo Z20Fits23 mm of length to spare
- Lian Li A3-mATXFits75 mm of length to spare
- Lian Li A4-H2ODoesn’t fit18 mm too long
- Lian Li Q58Doesn’t fit20 mm too long
- NCASE M1 V6.1Doesn’t fit18 mm too long
- NCASE M2Fits19 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit16 mm too long
- SilverStone SG13Doesn’t fit70 mm too long
- Sliger CerberusDoesn’t fit10 mm too long
- SSUPD Meshroom S V2Fits13 mm of length to spare
Other RX 9070 XT cards in the NR200P
- PowerColor Reaper Radeon RX 9070 XTFits26 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits18 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fitNo length to spare (330 of 330 mm)
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits42 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTDoesn’t fit1.6 mm too thick
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit0.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.