Every card in the NR200P
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the Cooler Master NR200P?
Doesn’t fit
No. The Sapphire Pulse Radeon RX 9070 XT is 1.6 mm too thick for the Cooler Master NR200P.
Length320 of 330 mm10 mm spare
Height120.3 of 156 mm35.8 mm spare
Thickness61.6 of 60 mm1.6 mm over
Exact measurements
| Size | Sapphire | NR200P | Room |
|---|---|---|---|
| Length | 320 mm | 330 mm | 10 mm spare |
| Height | 120.3 mm | 156 mm | 35.8 mm spare |
| Thickness | 61.6 mm | 60 mm | 1.6 mm over |
Cooler Master's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the Cooler Master NR200P?
- No. The Sapphire Pulse Radeon RX 9070 XT is 1.6 mm too thick for the Cooler Master NR200P. Length 320 of 330 mm, height 120.3 of 156 mm, thickness 61.6 of 60 mm.
- Where do these numbers come from?
- Cooler Master's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P specifications, checked October 24, 2026. Cooler Master lists 330 x 156 x 60 mm (triple slot) for the original NR200P; the length and height include the power connector.
- Card: Sapphire’s spec page, checked October 23, 2026.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
- With the card mounted vertically the CPU cooler drops to 76 mm.
This card in other small cases
- Cooler Master NR200P V2Fits14 mm of length to spare
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- Sliger CerberusFits10 mm of length to spare
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the NR200P
- PowerColor Reaper Radeon RX 9070 XTFits26 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit10 mm too long
- ASUS Prime Radeon RX 9070 XT OCFits18 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fitNo length to spare (330 of 330 mm)
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits42 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit0.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.