Every card in the A4-H2O
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the Lian Li A4-H2O?
Tight
Yes, but it's tight: only 2 mm of length to spare; no thickness to spare (3 of 3 slots).
Length320 of 322 mm2 mm spare
Height120.3 mmNot published
Thickness3 of 3 slots0 slots spare
Exact measurements
| Size | Sapphire | A4-H2O | Room |
|---|---|---|---|
| Length | 320 mm | 322 mm | 2 mm spare |
| Height | 120.3 mm | — | Not published |
| Thickness | 3 slots | 3 slots | 0 slots spare |
Lian Li's published spec, not yet measured by Respec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the Lian Li A4-H2O?
- Yes, but it's tight: only 2 mm of length to spare; no thickness to spare (3 of 3 slots). Length 320 of 322 mm, height 120.3 mm (no published limit), thickness 3 of 3 slots.
- Is anything not checked?
- Lian Li doesn't publish a height limit for the A4-H2O, so that isn't checked until we measure the case ourselves.
- Where do these numbers come from?
- Lian Li's published spec, not yet measured by Respec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Lian Li’s A4-H2O specifications, checked October 23, 2026. Lian Li publishes a length limit and a slot count (triple slot), not a height or a thickness in millimetres.
- Card: Sapphire’s spec page, checked October 23, 2026.
- Lian Li doesn't publish a height limit for the graphics card, so height isn't checked until we measure it.
- The card sits on a riser behind the motherboard (sandwich layout); the top chamber takes a 240 mm radiator up to 55 mm thick with fans.
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- Cooler Master NR200P V2Fits14 mm of length to spare
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- Sliger CerberusFits10 mm of length to spare
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the A4-H2O
- PowerColor Reaper Radeon RX 9070 XTFits18 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit18 mm too long
- ASUS Prime Radeon RX 9070 XT OCFits10 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit8 mm too long
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits34 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit8.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.