Every card in the NR200P V2
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the Cooler Master NR200P V2?
Fits
Yes. The Sapphire Pulse Radeon RX 9070 XT fits the Cooler Master NR200P V2 with 14 mm of length to spare.
Length320 of 334 mm14 mm spare
Height120.3 of 160 mm39.8 mm spare
Thickness61.6 of 80 mm18.4 mm spare
Exact measurements
| Size | Sapphire | NR200P V2 | Room |
|---|---|---|---|
| Length | 320 mm | 334 mm | 14 mm spare |
| Height | 120.3 mm | 160 mm | 39.8 mm spare |
| Thickness | 61.6 mm | 80 mm | 18.4 mm spare |
Card inside the front bracket, leaving 67 mm for the CPU cooler.
Cooler Master's published spec, not yet measured by Respec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the Cooler Master NR200P V2?
- Yes. The Sapphire Pulse Radeon RX 9070 XT fits the Cooler Master NR200P V2 with 14 mm of length to spare. Length 320 of 334 mm, height 120.3 of 160 mm, thickness 61.6 of 80 mm.
- Which NR200P V2 layout does it need?
- Card inside the front bracket, which leaves 67 mm for the CPU cooler.
- Where do these numbers come from?
- Cooler Master's published spec, not yet measured by Respec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
- Card: Sapphire’s spec page, checked October 23, 2026.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- Sliger CerberusFits10 mm of length to spare
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the NR200P V2
- PowerColor Reaper Radeon RX 9070 XTFits30 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTFits17 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits22 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCFits27 mm of length to spare
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits46 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCFits26.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.