Every card in the A3-mATX
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the Lian Li A3-mATX?
Fits
Yes. The Sapphire Pulse Radeon RX 9070 XT fits the Lian Li A3-mATX with 95 mm of length to spare.
Length320 of 415 mm95 mm spare
Height120.3 mmNot published
Thickness3 of 4 slots1 slots spare
Exact measurements
| Size | Sapphire | A3-mATX | Room |
|---|---|---|---|
| Length | 320 mm | 415 mm | 95 mm spare |
| Height | 120.3 mm | — | Not published |
| Thickness | 3 slots | 4 slots | 1 slots spare |
Lian Li's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the Lian Li A3-mATX?
- Yes. The Sapphire Pulse Radeon RX 9070 XT fits the Lian Li A3-mATX with 95 mm of length to spare. Length 320 of 415 mm, height 120.3 mm (no published limit), thickness 3 of 4 slots.
- Is anything not checked?
- Lian Li doesn't publish a height limit for the A3-mATX, so that isn't checked.
- Where do these numbers come from?
- Lian Li's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Lian Li’s A3-mATX specifications, checked October 24, 2026. Lian Li lists cards up to 415 mm long and 4 slots thick.
- Card: Sapphire’s spec page, checked October 23, 2026.
- A 25 mm fan under the card limits it to 61 mm (3 slots); a bottom radiator with fans leaves no room for a card.
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- Cooler Master NR200P V2Fits14 mm of length to spare
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- Sliger CerberusFits10 mm of length to spare
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the A3-mATX
- PowerColor Reaper Radeon RX 9070 XTFits111 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTFits75 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits103 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCFits85 mm of length to spare
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits127 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCFits84.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.