Every card in the SG13
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the SilverStone SG13?
Doesn’t fit
No. The Sapphire Pulse Radeon RX 9070 XT is 50 mm too long and 1 slot too thick for the SilverStone SG13.
Length320 of 270 mm50 mm over
Height120.3 of 129 mm8.8 mm spare
Thickness3 of 2 slots1 slots over
Exact measurements
| Size | Sapphire | SG13 | Room |
|---|---|---|---|
| Length | 320 mm | 270 mm | 50 mm over |
| Height | 120.3 mm | 129 mm | 8.8 mm spare |
| Thickness | 3 slots | 2 slots | 1 slots over |
SilverStone's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the SilverStone SG13?
- No. The Sapphire Pulse Radeon RX 9070 XT is 50 mm too long and 1 slot too thick for the SilverStone SG13. Length 320 of 270 mm, height 120.3 of 129 mm, thickness 3 of 2 slots.
- Where do these numbers come from?
- SilverStone's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SilverStone’s SG13 specifications, checked October 24, 2026. SilverStone lists cards up to 270 mm long with a 129 mm width (height) restriction, in 2 expansion slots.
- Card: Sapphire’s spec page, checked October 23, 2026.
- A front radiator needs the upper drive cage removed and cuts the room for the card.
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- Cooler Master NR200P V2Fits14 mm of length to spare
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- Sliger CerberusFits10 mm of length to spare
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the SG13
- PowerColor Reaper Radeon RX 9070 XTDoesn’t fit34 mm too long
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit70 mm too long
- ASUS Prime Radeon RX 9070 XT OCDoesn’t fit42 mm too long
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit60 mm too long
- Gigabyte Radeon RX 9070 XT Gaming OC 16GDoesn’t fit18 mm too long
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit60.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.