Every card in the M1
Will it fit
Does the Sapphire Pulse Radeon RX 9070 XT fit in the NCASE M1 V6.1?
Doesn’t fit
No. The Sapphire Pulse Radeon RX 9070 XT is only 2 mm of length to spare and only 4.8 mm of height to spare and 16.6 mm too thick for the NCASE M1 V6.1.
Length320 of 322 mm2 mm spare
Height120.3 of 125 mm4.8 mm spare
Thickness61.6 of 45 mm16.6 mm over
Exact measurements
| Size | Sapphire | M1 | Room |
|---|---|---|---|
| Length | 320 mm | 322 mm | 2 mm spare |
| Height | 120.3 mm | 125 mm | 4.8 mm spare |
| Thickness | 61.6 mm | 45 mm | 16.6 mm over |
NCASE's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Sapphire Pulse Radeon RX 9070 XT fit in the NCASE M1 V6.1?
- No. The Sapphire Pulse Radeon RX 9070 XT is only 2 mm of length to spare and only 4.8 mm of height to spare and 16.6 mm too thick for the NCASE M1 V6.1. Length 320 of 322 mm, height 120.3 of 125 mm, thickness 61.6 of 45 mm.
- Where do these numbers come from?
- NCASE's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s M1 specifications, checked October 24, 2026. NCASE lists 280 mm for cards up to 60 mm (3 slots) thick, 290 mm with the front I/O ports removed, and 322 mm for cards up to 45 mm (2.2 slots). Height is 140 mm mid-card, 130 mm at the back corner and 125 mm past 280 mm of length; we use the corner figures.
- Card: Sapphire’s spec page, checked October 23, 2026.
- NCASE asks for 15 to 20 mm above the card for PCIe power connectors.
- A 25 mm bottom fan limits the card to 2 slots (42 mm); a 15 mm fan to 2.5 slots (50 mm).
This card in other small cases
- Cooler Master NR200PDoesn’t fit1.6 mm too thick
- Cooler Master NR200P V2Fits14 mm of length to spare
- FormD T1 V2.5TightOnly 5 mm of length to spare
- Fractal Design Era 2TightOnly 6 mm of length to spare
- Fractal Design RidgeDoesn’t fitOnly 4.8 mm of height to spare
- Fractal Design TerraTightOnly 2 mm of length to spare
- Jonsbo Z20Fits43 mm of length to spare
- Lian Li A3-mATXFits95 mm of length to spare
- Lian Li A4-H2OTightOnly 2 mm of length to spare
- Lian Li Q58TightNo length to spare (320 of 320 mm)
- NCASE M2Fits39 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 4 mm of length to spare
- SilverStone SG13Doesn’t fit50 mm too long
- Sliger CerberusFits10 mm of length to spare
- SSUPD Meshroom S V2TightOnly 1.4 mm of thickness to spare
Other RX 9070 XT cards in the M1
- PowerColor Reaper Radeon RX 9070 XTDoesn’t fit2 mm too tall
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit18 mm too long
- ASUS Prime Radeon RX 9070 XT OCDoesn’t fit5 mm too tall
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit8 mm too long
- Gigabyte Radeon RX 9070 XT Gaming OC 16GDoesn’t fitOnly 2 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit8.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.