Every card in the A4-H2O
Will it fit
Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the Lian Li A4-H2O?
Fits
Yes. The Gigabyte Radeon RX 9070 XT Gaming OC 16G fits the Lian Li A4-H2O with 34 mm of length to spare.
Length288 of 322 mm34 mm spare
Height132 mmNot published
Thickness≈2.76 of 3 slots0.24 slots spare
Exact measurements
| Size | Gigabyte | A4-H2O | Room |
|---|---|---|---|
| Length | 288 mm | 322 mm | 34 mm spare |
| Height | 132 mm | — | Not published |
| Thickness | ≈2.76 slots | 3 slots | 0.24 slots spare |
Lian Li's published spec, not yet measured by Respec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the Lian Li A4-H2O?
- Yes. The Gigabyte Radeon RX 9070 XT Gaming OC 16G fits the Lian Li A4-H2O with 34 mm of length to spare. Length 288 of 322 mm, height 132 mm (no published limit), thickness ≈2.76 of 3 slots.
- Is anything not checked?
- Lian Li doesn't publish a height limit for the A4-H2O, so that isn't checked until we measure the case ourselves.
- Where do these numbers come from?
- Lian Li's published spec, not yet measured by Respec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Lian Li’s A4-H2O specifications, checked October 23, 2026. Lian Li publishes a length limit and a slot count (triple slot), not a height or a thickness in millimetres.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- Lian Li doesn't publish a height limit for the graphics card, so height isn't checked until we measure it.
- The card sits on a riser behind the motherboard (sandwich layout); the top chamber takes a 240 mm radiator up to 55 mm thick with fans.
This card in other small cases
- Cooler Master NR200PFits42 mm of length to spare
- Cooler Master NR200P V2Fits46 mm of length to spare
- FormD T1 V2.5TightA 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only)
- Fractal Design Era 2TightOnly 2 mm of thickness to spare
- Fractal Design RidgeDoesn’t fit7 mm too tall
- Fractal Design TerraTightOnly 1 mm of thickness to spare
- Jonsbo Z20Fits75 mm of length to spare
- Lian Li A3-mATXFits127 mm of length to spare
- Lian Li Q58Fits32 mm of length to spare
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits71 mm of length to spare
- Phanteks Evolv Shift XTFits36 mm of length to spare
- SilverStone SG13Doesn’t fit18 mm too long
- Sliger CerberusFits42 mm of length to spare
- SSUPD Meshroom S V2Fits44 mm of length to spare
Other RX 9070 XT cards in the A4-H2O
- PowerColor Reaper Radeon RX 9070 XTFits18 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit18 mm too long
- ASUS Prime Radeon RX 9070 XT OCFits10 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit8 mm too long
- Sapphire Pulse Radeon RX 9070 XTTightOnly 2 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit8.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.