Every card in the T1
Will it fit
Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the FormD T1 V2.5?
Tight
Yes, but it's tight: a 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only).
Length288 of 325 mm37 mm spare
Height132 of 140 mm8 mm spare
Thickness≈2.76 of 3 slots0.24 slots spare
Exact measurements
| Size | Gigabyte | T1 | Room |
|---|---|---|---|
| Length | 288 mm | 325 mm | 37 mm spare |
| Height | 132 mm | 140 mm | 8 mm spare |
| Thickness | ≈2.76 slots | 3 slots | 0.24 slots spare |
Set for a 3-slot card, leaving 53 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the FormD T1 V2.5?
- Yes, but it's tight: a 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only). Length 288 of 325 mm, height 132 of 140 mm, thickness ≈2.76 of 3 slots.
- Which T1 layout does it need?
- A 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only).
- Where do these numbers come from?
- NCASE's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PFits42 mm of length to spare
- Cooler Master NR200P V2Fits46 mm of length to spare
- Fractal Design Era 2TightOnly 2 mm of thickness to spare
- Fractal Design RidgeDoesn’t fit7 mm too tall
- Fractal Design TerraTightOnly 1 mm of thickness to spare
- Jonsbo Z20Fits75 mm of length to spare
- Lian Li A3-mATXFits127 mm of length to spare
- Lian Li A4-H2OFits34 mm of length to spare
- Lian Li Q58Fits32 mm of length to spare
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits71 mm of length to spare
- Phanteks Evolv Shift XTFits36 mm of length to spare
- SilverStone SG13Doesn’t fit18 mm too long
- Sliger CerberusFits42 mm of length to spare
- SSUPD Meshroom S V2Fits44 mm of length to spare
Other RX 9070 XT cards in the T1
- PowerColor Reaper Radeon RX 9070 XTFits21 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit15 mm too long
- ASUS Prime Radeon RX 9070 XT OCFits13 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fit5 mm too long
- Sapphire Pulse Radeon RX 9070 XTTightOnly 5 mm of length to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fit5.8 mm too long
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.