Every card in the Ridge
Will it fit
Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the Fractal Design Ridge?
Doesn’t fit
No. The Gigabyte Radeon RX 9070 XT Gaming OC 16G is 7 mm too tall and only 1 mm of thickness to spare for the Fractal Design Ridge.
Length288 of 335 mm47 mm spare
Height132 of 125 mm7 mm over
Thickness56 of 57 mm1 mm spare
Exact measurements
| Size | Gigabyte | Ridge | Room |
|---|---|---|---|
| Length | 288 mm | 335 mm | 47 mm spare |
| Height | 132 mm | 125 mm | 7 mm over |
| Thickness | 56 mm | 57 mm | 1 mm spare |
Fractal Design's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte Radeon RX 9070 XT Gaming OC 16G fit in the Fractal Design Ridge?
- No. The Gigabyte Radeon RX 9070 XT Gaming OC 16G is 7 mm too tall and only 1 mm of thickness to spare for the Fractal Design Ridge. Length 288 of 335 mm, height 132 of 125 mm, thickness 56 of 57 mm.
- Where do these numbers come from?
- Fractal Design's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Fractal Design’s Ridge specifications, checked October 24, 2026. Fractal lists 335 mm length, 125 mm height ('GPU max width') and 57 mm thickness, with 70 mm for the CPU cooler.
- Card: Gigabyte’s spec page, checked October 23, 2026.
This card in other small cases
- Cooler Master NR200PFits42 mm of length to spare
- Cooler Master NR200P V2Fits46 mm of length to spare
- FormD T1 V2.5TightA 3-slot card leaves 53 mm for the CPU cooler (low-profile coolers only)
- Fractal Design Era 2TightOnly 2 mm of thickness to spare
- Fractal Design TerraTightOnly 1 mm of thickness to spare
- Jonsbo Z20Fits75 mm of length to spare
- Lian Li A3-mATXFits127 mm of length to spare
- Lian Li A4-H2OFits34 mm of length to spare
- Lian Li Q58Fits32 mm of length to spare
- NCASE M1 V6.1Doesn’t fitOnly 2 mm of length to spare
- NCASE M2Fits71 mm of length to spare
- Phanteks Evolv Shift XTFits36 mm of length to spare
- SilverStone SG13Doesn’t fit18 mm too long
- Sliger CerberusFits42 mm of length to spare
- SSUPD Meshroom S V2Fits44 mm of length to spare
Other RX 9070 XT cards in the Ridge
- PowerColor Reaper Radeon RX 9070 XTDoesn’t fit2 mm too tall
- PowerColor Hellhound Radeon RX 9070 XTDoesn’t fit5 mm too long
- ASUS Prime Radeon RX 9070 XT OCDoesn’t fit5 mm too tall
- ASUS TUF Gaming Radeon RX 9070 XT OCDoesn’t fitOnly 5 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTDoesn’t fitOnly 4.8 mm of height to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCDoesn’t fitOnly 4.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.