Every card in the Meshroom S
Will it fit
Does the PowerColor Reaper Radeon RX 9070 XT fit in the SSUPD Meshroom S V2?
Fits
Yes. The PowerColor Reaper Radeon RX 9070 XT fits the SSUPD Meshroom S V2 with 28 mm of length to spare.
Length304 of 332 mm28 mm spare
Height127 of 153 mm26 mm spare
Thickness42 of 63 mm21 mm spare
Exact measurements
| Size | PowerColor | Meshroom S | Room |
|---|---|---|---|
| Length | 304 mm | 332 mm | 28 mm spare |
| Height | 127 mm | 153 mm | 26 mm spare |
| Thickness | 42 mm | 63 mm | 21 mm spare |
Rear position, 3-slot mode, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Reaper Radeon RX 9070 XT fit in the SSUPD Meshroom S V2?
- Yes. The PowerColor Reaper Radeon RX 9070 XT fits the SSUPD Meshroom S V2 with 28 mm of length to spare. Length 304 of 332 mm, height 127 of 153 mm, thickness 42 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 304 x 127 x 42 mm with the bracket and 289 x 111 x 41 mm without; we use the larger figures.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PFits26 mm of length to spare
- Cooler Master NR200P V2Fits30 mm of length to spare
- FormD T1 V2.5Fits21 mm of length to spare
- Fractal Design Era 2Fits22 mm of length to spare
- Fractal Design RidgeDoesn’t fit2 mm too tall
- Fractal Design TerraFits18 mm of length to spare
- Jonsbo Z20Fits59 mm of length to spare
- Lian Li A3-mATXFits111 mm of length to spare
- Lian Li A4-H2OFits18 mm of length to spare
- Lian Li Q58Fits16 mm of length to spare
- NCASE M1 V6.1Doesn’t fit2 mm too tall
- NCASE M2Fits55 mm of length to spare
- Phanteks Evolv Shift XTFits20 mm of length to spare
- SilverStone SG13Doesn’t fit34 mm too long
- Sliger CerberusFits26 mm of length to spare
Other RX 9070 XT cards in the Meshroom S
- PowerColor Hellhound Radeon RX 9070 XTFits13 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits20 mm of length to spare
- ASUS TUF Gaming Radeon RX 9070 XT OCTightOnly 2 mm of length to spare
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits44 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTTightOnly 1.4 mm of thickness to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCTightOnly 1.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.