Every card in the Meshroom S
Will it fit
Does the ASUS TUF Gaming Radeon RX 9070 XT OC fit in the SSUPD Meshroom S V2?
Tight
Yes, but it's tight: only 2 mm of length to spare; only 0.5 mm of thickness to spare.
Length330 of 332 mm2 mm spare
Height140 of 153 mm13 mm spare
Thickness62.5 of 63 mm0.5 mm spare
Exact measurements
| Size | ASUS | Meshroom S | Room |
|---|---|---|---|
| Length | 330 mm | 332 mm | 2 mm spare |
| Height | 140 mm | 153 mm | 13 mm spare |
| Thickness | 62.5 mm | 63 mm | 0.5 mm spare |
Rear position, 3-slot mode, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RX 9070 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the ASUS TUF Gaming Radeon RX 9070 XT OC fit in the SSUPD Meshroom S V2?
- Yes, but it's tight: only 2 mm of length to spare; only 0.5 mm of thickness to spare. Length 330 of 332 mm, height 140 of 153 mm, thickness 62.5 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: ASUS’s spec page, checked October 23, 2026.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PDoesn’t fitNo length to spare (330 of 330 mm)
- Cooler Master NR200P V2Fits27 mm of length to spare
- FormD T1 V2.5Doesn’t fit5 mm too long
- Fractal Design Era 2Doesn’t fit4 mm too long
- Fractal Design RidgeDoesn’t fitOnly 5 mm of length to spare
- Fractal Design TerraDoesn’t fit8 mm too long
- Jonsbo Z20Fits33 mm of length to spare
- Lian Li A3-mATXFits85 mm of length to spare
- Lian Li A4-H2ODoesn’t fit8 mm too long
- Lian Li Q58Doesn’t fit10 mm too long
- NCASE M1 V6.1Doesn’t fit8 mm too long
- NCASE M2Fits29 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit6 mm too long
- SilverStone SG13Doesn’t fit60 mm too long
- Sliger CerberusTightNo length to spare (330 of 330 mm)
Other RX 9070 XT cards in the Meshroom S
- PowerColor Reaper Radeon RX 9070 XTFits28 mm of length to spare
- PowerColor Hellhound Radeon RX 9070 XTFits13 mm of length to spare
- ASUS Prime Radeon RX 9070 XT OCFits20 mm of length to spare
- Gigabyte Radeon RX 9070 XT Gaming OC 16GFits44 mm of length to spare
- Sapphire Pulse Radeon RX 9070 XTTightOnly 1.4 mm of thickness to spare
- Sapphire Nitro+ Radeon RX 9070 XT OCTightOnly 1.2 mm of length to spare
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.