Will it fit
Will it fit · RTX 5070 Ti
How big is the PNY GeForce RTX 5070 Ti OC Triple Fan?
299.7 mm long, 120.1 mm tall and 59.7 mm thick (2.98 slots). It fits 22 of the 25 cases we list, 7 only just.
- Length
- 299.7mm11.8 in
- Height
- 120.1mm4.7 in
- Thickness
- 59.7mm2.4 in
- Slots
- 2.98slots
Source: PNY’s spec page, checked October 23, 2026. PNY lists 11.80 x 4.73 x 2.35 in (2.98 slots) for its 5070 Ti triple-fan cards; converted to millimetres.
Questions
- How big is the PNY GeForce RTX 5070 Ti OC Triple Fan?
- The PNY GeForce RTX 5070 Ti OC Triple Fan is 299.7 mm long, 120.1 mm tall and 59.7 mm thick (2.98 slots), from PNY's spec page. PNY lists 11.80 x 4.73 x 2.35 in (2.98 slots) for its 5070 Ti triple-fan cards; converted to millimetres.
- Which small form factor cases does the PNY GeForce RTX 5070 Ti OC Triple Fan fit?
- It fits 13 of the 16 small form factor cases we list. In the Cooler Master NR200P, FormD T1 V2.5, Fractal Design Era 2, Fractal Design Terra, Lian Li A4-H2O, Lian Li Q58 and Phanteks Evolv Shift XT it's tight. It doesn't fit the Fractal Design Ridge, NCASE M1 V6.1 or SilverStone SG13.
- Which mid-tower cases does the PNY GeForce RTX 5070 Ti OC Triple Fan fit?
- It fits all 9 mid-tower cases we list with room to spare.
- Where do these numbers come from?
- Card size from PNY's spec page, checked October 2026. Case limits are each case maker's published spec, unless the case's page says Respec measured it. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Every case we list
Each case’s page has its limits and the maker’s source.
Small form factor 13 of 16 fit
- Cooler Master NR200PTightOnly 0.3 mm of thickness to spare
- Cooler Master NR200P V2Fits34.3 mm of length to spare
- FormD T1 V2.5TightOnly 0.02 slots of thickness to spare
- Fractal Design Era 2TightThe central wall has to move the full 15 mm, leaving 55 mm for the CPU cooler (low-profile coolers only)
- Fractal Design RidgeDoesn’t fitOnly 4.9 mm of height to spare
- Fractal Design TerraTightThe spine has to move to position 5, leaving 57 mm for the CPU cooler (low-profile coolers only)
- Jonsbo Z20Fits63.3 mm of length to spare
- Lian Li A3-mATXFits115.3 mm of length to spare
- Lian Li A4-H2OTightOnly 0.02 slots of thickness to spare
- Lian Li Q58TightOnly 0.02 slots of thickness to spare
- NCASE M1 V6.1Doesn’t fit9.7 mm too long
- NCASE M2Fits59.3 mm of length to spare
- Phanteks Evolv Shift XTTightOnly 2.3 mm of thickness to spare
- SilverStone SG13Doesn’t fit29.7 mm too long
- Sliger CerberusFits30.3 mm of length to spare
- SSUPD Meshroom S V2Fits32.3 mm of length to spare
Mid-towers 9 of 9 fit
- Corsair 4000D AirflowFits60.3 mm of length to spare
- Fractal Design NorthFits55.3 mm of length to spare
- HYTE Y40Fits122.3 mm of length to spare
- HYTE Y60Fits50.3 mm of length to spare
- Lian Li Lancool 216Fits92.3 mm of length to spare
- Lian Li O11 Dynamic EVOFits126.3 mm of length to spare
- Lian Li O11 VisionFits130.3 mm of length to spare
- NZXT H5 FlowFits110.3 mm of length to spare
- Phanteks XT ProFits115.3 mm of length to spare
Other RTX 5070 Ti cards
Check it against one case with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.