Small-form-factor PCs · Greater Chicago

Every card in the NR200P V2

Will it fit

Does the Sapphire Pulse Radeon RX 9070 fit in the Cooler Master NR200P V2?

Fits

Yes. The Sapphire Pulse Radeon RX 9070 fits the Cooler Master NR200P V2 with 54 mm of length to spare.

Length280 of 334 mm54 mm spare
Height120.3 of 160 mm39.8 mm spare
Thickness51.5 of 80 mm28.5 mm spare
Exact measurements
SizeSapphireNR200P V2Room
Length280 mm334 mm54 mm spare
Height120.3 mm160 mm39.8 mm spare
Thickness51.5 mm80 mm28.5 mm spare

Card inside the front bracket, leaving 67 mm for the CPU cooler.

Cooler Master's published spec, not yet measured by Respec

Rather have it built?

We build the RX 9070 into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the Sapphire Pulse Radeon RX 9070 fit in the Cooler Master NR200P V2?
Yes. The Sapphire Pulse Radeon RX 9070 fits the Cooler Master NR200P V2 with 54 mm of length to spare. Length 280 of 334 mm, height 120.3 of 160 mm, thickness 51.5 of 80 mm.
Which NR200P V2 layout does it need?
Card inside the front bracket, which leaves 67 mm for the CPU cooler.
Where do these numbers come from?
Cooler Master's published spec, not yet measured by Respec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

  • Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
  • Card: Sapphire’s spec page, checked October 23, 2026.
  • Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.