Every card in the NR200P V2
Will it fit
Does the PowerColor Hellhound Radeon RX 9070 fit in the Cooler Master NR200P V2?
Fits
Yes. The PowerColor Hellhound Radeon RX 9070 fits the Cooler Master NR200P V2 with 17 mm of length to spare.
Length340 of 357 mm17 mm spare
Height142 of 160 mm18 mm spare
Thickness42 of 73 mm31 mm spare
Exact measurements
| Size | PowerColor | NR200P V2 | Room |
|---|---|---|---|
| Length | 340 mm | 357 mm | 17 mm spare |
| Height | 142 mm | 160 mm | 18 mm spare |
| Thickness | 42 mm | 73 mm | 31 mm spare |
Card running past the front bracket, leaving 67 mm for the CPU cooler.
Cooler Master's published spec, not yet measured by Respec
Rather have it built?
We build the RX 9070 into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Hellhound Radeon RX 9070 fit in the Cooler Master NR200P V2?
- Yes. The PowerColor Hellhound Radeon RX 9070 fits the Cooler Master NR200P V2 with 17 mm of length to spare. Length 340 of 357 mm, height 142 of 160 mm, thickness 42 of 73 mm.
- Which NR200P V2 layout does it need?
- Card running past the front bracket, which leaves 67 mm for the CPU cooler. Inside the front bracket it is 6 mm too long.
- Where do these numbers come from?
- Cooler Master's published spec, not yet measured by Respec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 340 x 142 x 42 mm with the bracket and 327 x 128 x 41 mm without; we use the larger figures.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
This card in other small cases
- Cooler Master NR200PDoesn’t fit10 mm too long
- FormD T1 V2.5Doesn’t fit15 mm too long
- Fractal Design Era 2Doesn’t fit14 mm too long
- Fractal Design RidgeDoesn’t fit5 mm too long
- Fractal Design TerraDoesn’t fit18 mm too long
- Jonsbo Z20Fits23 mm of length to spare
- Lian Li A3-mATXFits75 mm of length to spare
- Lian Li A4-H2ODoesn’t fit18 mm too long
- Lian Li Q58Doesn’t fit20 mm too long
- NCASE M1 V6.1Doesn’t fit18 mm too long
- NCASE M2Fits19 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit16 mm too long
- SilverStone SG13Doesn’t fit70 mm too long
- Sliger CerberusDoesn’t fit10 mm too long
- SSUPD Meshroom S V2Fits13 mm of length to spare
Other RX 9070 cards in the NR200P V2
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.