Small-form-factor PCs · Greater Chicago

Every card in the NR200P

Will it fit

Does the PowerColor Hellhound Radeon RX 9070 fit in the Cooler Master NR200P?

Doesn’t fit

No. The PowerColor Hellhound Radeon RX 9070 is 10 mm too long for the Cooler Master NR200P.

Length340 of 330 mm10 mm over
Height142 of 156 mm14 mm spare
Thickness42 of 60 mm18 mm spare
Exact measurements
SizePowerColorNR200PRoom
Length340 mm330 mm10 mm over
Height142 mm156 mm14 mm spare
Thickness42 mm60 mm18 mm spare

Cooler Master's published spec

Rather have it built?

We build the RX 9070 into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the PowerColor Hellhound Radeon RX 9070 fit in the Cooler Master NR200P?
No. The PowerColor Hellhound Radeon RX 9070 is 10 mm too long for the Cooler Master NR200P. Length 340 of 330 mm, height 142 of 156 mm, thickness 42 of 60 mm.
Where do these numbers come from?
Cooler Master's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

  • Case: Cooler Master’s NR200P specifications, checked October 24, 2026. Cooler Master lists 330 x 156 x 60 mm (triple slot) for the original NR200P; the length and height include the power connector.
  • Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 340 x 142 x 42 mm with the bracket and 327 x 128 x 41 mm without; we use the larger figures.
  • Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
  • With the card mounted vertically the CPU cooler drops to 76 mm.

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.