Every card in the T1
Will it fit
Does the PowerColor Hellhound Radeon RX 9070 fit in the FormD T1 V2.5?
Doesn’t fit
No. The PowerColor Hellhound Radeon RX 9070 is 15 mm too long and 2 mm too tall and no thickness to spare (2 of 2 slots) for the FormD T1 V2.5.
Length340 of 325 mm15 mm over
Height142 of 140 mm2 mm over
Thickness2 of 2 slots0 slots spare
Exact measurements
| Size | PowerColor | T1 | Room |
|---|---|---|---|
| Length | 340 mm | 325 mm | 15 mm over |
| Height | 142 mm | 140 mm | 2 mm over |
| Thickness | 2 slots | 2 slots | 0 slots spare |
NCASE's published spec
Rather have it built?
We build the RX 9070 into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Hellhound Radeon RX 9070 fit in the FormD T1 V2.5?
- No. The PowerColor Hellhound Radeon RX 9070 is 15 mm too long and 2 mm too tall and no thickness to spare (2 of 2 slots) for the FormD T1 V2.5. Length 340 of 325 mm, height 142 of 140 mm, thickness 2 of 2 slots.
- Where do these numbers come from?
- NCASE's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 340 x 142 x 42 mm with the bracket and 327 x 128 x 41 mm without; we use the larger figures.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PDoesn’t fit10 mm too long
- Cooler Master NR200P V2Fits17 mm of length to spare
- Fractal Design Era 2Doesn’t fit14 mm too long
- Fractal Design RidgeDoesn’t fit5 mm too long
- Fractal Design TerraDoesn’t fit18 mm too long
- Jonsbo Z20Fits23 mm of length to spare
- Lian Li A3-mATXFits75 mm of length to spare
- Lian Li A4-H2ODoesn’t fit18 mm too long
- Lian Li Q58Doesn’t fit20 mm too long
- NCASE M1 V6.1Doesn’t fit18 mm too long
- NCASE M2Fits19 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit16 mm too long
- SilverStone SG13Doesn’t fit70 mm too long
- Sliger CerberusDoesn’t fit10 mm too long
- SSUPD Meshroom S V2Fits13 mm of length to spare
Other RX 9070 cards in the T1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.