Small-form-factor PCs · Greater Chicago

Every card in the Cerberus

Will it fit

Does the PowerColor Hellhound Radeon RX 9070 fit in the Sliger Cerberus?

Doesn’t fit

No. The PowerColor Hellhound Radeon RX 9070 is 10 mm too long for the Sliger Cerberus.

Length340 of 330 mm10 mm over
Height142 of 150 mm8 mm spare
Thickness2 slotsNot published
Exact measurements
SizePowerColorCerberusRoom
Length340 mm330 mm10 mm over
Height142 mm150 mm8 mm spare
Thickness2 slots—Not published

Sliger's published spec

Rather have it built?

We build the RX 9070 into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the PowerColor Hellhound Radeon RX 9070 fit in the Sliger Cerberus?
No. The PowerColor Hellhound Radeon RX 9070 is 10 mm too long for the Sliger Cerberus. Length 340 of 330 mm, height 142 of 150 mm, thickness 2 slots (no published limit).
Is anything not checked?
Sliger doesn't publish a thickness limit for the Cerberus, so that isn't checked.
Where do these numbers come from?
Sliger's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

  • Case: Sliger’s Cerberus specifications, checked October 24, 2026. Sliger lists cards up to 330 mm long and 150 mm tall in five expansion slots.
  • Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 340 x 142 x 42 mm with the bracket and 327 x 128 x 41 mm without; we use the larger figures.
  • Sliger discontinued the Cerberus on July 31, 2025.

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.