Small-form-factor PCs · Greater Chicago

Every card in the NR200P V2

Will it fit

Does the ASUS Prime Radeon RX 9070 OC fit in the Cooler Master NR200P V2?

Fits

Yes. The ASUS Prime Radeon RX 9070 OC fits the Cooler Master NR200P V2 with 22 mm of length to spare.

Length312 of 334 mm22 mm spare
Height130 of 160 mm30 mm spare
Thickness50 of 80 mm30 mm spare
Exact measurements
SizeASUSNR200P V2Room
Length312 mm334 mm22 mm spare
Height130 mm160 mm30 mm spare
Thickness50 mm80 mm30 mm spare

Card inside the front bracket, leaving 67 mm for the CPU cooler.

Cooler Master's published spec, not yet measured by Respec

Rather have it built?

We build the RX 9070 into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the ASUS Prime Radeon RX 9070 OC fit in the Cooler Master NR200P V2?
Yes. The ASUS Prime Radeon RX 9070 OC fits the Cooler Master NR200P V2 with 22 mm of length to spare. Length 312 of 334 mm, height 130 of 160 mm, thickness 50 of 80 mm.
Which NR200P V2 layout does it need?
Card inside the front bracket, which leaves 67 mm for the CPU cooler.
Where do these numbers come from?
Cooler Master's published spec, not yet measured by Respec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

  • Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
  • Card: ASUS’s spec page, checked October 23, 2026.
  • Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.