Small-form-factor PCs · Greater Chicago

Every card in the Terra

Will it fit

Does the Sapphire Pulse Radeon RX 9070 fit in the Fractal Design Terra?

Fits

Yes. The Sapphire Pulse Radeon RX 9070 fits the Fractal Design Terra with 42 mm of length to spare.

Length280 of 322 mm42 mm spare
Height120.3 of 145 mm24.8 mm spare
Thickness51.5 of 58 mm6.5 mm spare
Exact measurements
SizeSapphireTerraRoom
Length280 mm322 mm42 mm spare
Height120.3 mm145 mm24.8 mm spare
Thickness51.5 mm58 mm6.5 mm spare

Spine at position 4 of 7, leaving 62 mm for the CPU cooler.

Fractal Design's published spec, not yet measured by Respec

Rather have it built?

We build the RX 9070 into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the Sapphire Pulse Radeon RX 9070 fit in the Fractal Design Terra?
Yes. The Sapphire Pulse Radeon RX 9070 fits the Fractal Design Terra with 42 mm of length to spare. Length 280 of 322 mm, height 120.3 of 145 mm, thickness 51.5 of 58 mm.
Which Terra layout does it need?
Spine at position 4 of 7, which leaves 62 mm for the CPU cooler.
Where do these numbers come from?
Fractal Design's published spec, not yet measured by Respec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

  • Case: Fractal Design’s Terra specifications, checked October 23, 2026. Fractal's spine table: seven positions, each trading graphics-card thickness against CPU-cooler height; a card taller than 131 mm loses 10 mm of thickness because the side panel narrows toward the top. Length and height from the Terra product page.
  • Card: Sapphire’s spec page, checked October 23, 2026.
  • The Terra's spine moves: every millimetre the graphics card gains comes out of the CPU cooler's room.
  • Length drops to 200 mm if a 120 mm radiator is mounted on the GPU side.

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.