Which T1 layout does it need?

Set for a 2.25-slot card, which leaves 68 mm for the CPU cooler.

Where do these numbers come from?

NCASE's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Every card in the T1

Will it fit

Does the PowerColor Reaper Radeon RX 9060 XT 16GB fit in the FormD T1 V2.5?

Fits

Yes. The PowerColor Reaper Radeon RX 9060 XT 16GB fits the FormD T1 V2.5 with 105 mm of length to spare.

Length220 of 325 mm105 mm spare

Height120 of 140 mm20 mm spare

Thickness2 of 2.25 slots0.25 slots spare

Exact measurements

Size	PowerColor	T1	Room
Length	220 mm	325 mm	105 mm spare
Height	120 mm	140 mm	20 mm spare
Thickness	2 slots	2.25 slots	0.25 slots spare

Set for a 2.25-slot card, leaving 68 mm for the CPU cooler.

NCASE's published spec

Rather have it built?

We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the PowerColor Reaper Radeon RX 9060 XT 16GB fit in the FormD T1 V2.5?: Yes. The PowerColor Reaper Radeon RX 9060 XT 16GB fits the FormD T1 V2.5 with 105 mm of length to spare. Length 220 of 325 mm, height 120 of 140 mm, thickness 2 of 2.25 slots.
Which T1 layout does it need?: Set for a 2.25-slot card, which leaves 68 mm for the CPU cooler.
Where do these numbers come from?: NCASE's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 220 x 120 x 40 mm with the bracket and 200 x 100 x 39 mm without; we use the larger figures.
The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.

This card in other small cases

The card’s size, and all 25 cases

Other RX 9060 XT cards in the T1

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.