Every card in the Meshroom S
Will it fit
Does the PowerColor Reaper Radeon RX 9060 XT 16GB fit in the SSUPD Meshroom S V2?
Fits
Yes. The PowerColor Reaper Radeon RX 9060 XT 16GB fits the SSUPD Meshroom S V2 with 112 mm of length to spare.
Length220 of 332 mm112 mm spare
Height120 of 153 mm33 mm spare
Thickness40 of 63 mm23 mm spare
Exact measurements
| Size | PowerColor | Meshroom S | Room |
|---|---|---|---|
| Length | 220 mm | 332 mm | 112 mm spare |
| Height | 120 mm | 153 mm | 33 mm spare |
| Thickness | 40 mm | 63 mm | 23 mm spare |
Rear position, 3-slot mode, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Reaper Radeon RX 9060 XT 16GB fit in the SSUPD Meshroom S V2?
- Yes. The PowerColor Reaper Radeon RX 9060 XT 16GB fits the SSUPD Meshroom S V2 with 112 mm of length to spare. Length 220 of 332 mm, height 120 of 153 mm, thickness 40 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 220 x 120 x 40 mm with the bracket and 200 x 100 x 39 mm without; we use the larger figures.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PFits110 mm of length to spare
- Cooler Master NR200P V2Fits114 mm of length to spare
- FormD T1 V2.5Fits105 mm of length to spare
- Fractal Design Era 2Fits106 mm of length to spare
- Fractal Design RidgeFits115 mm of length to spare
- Fractal Design TerraFits102 mm of length to spare
- Jonsbo Z20Fits143 mm of length to spare
- Lian Li A3-mATXFits195 mm of length to spare
- Lian Li A4-H2OFits102 mm of length to spare
- Lian Li Q58Fits100 mm of length to spare
- NCASE M1 V6.1Fits60 mm of length to spare
- NCASE M2Fits139 mm of length to spare
- Phanteks Evolv Shift XTFits104 mm of length to spare
- SilverStone SG13TightNo thickness to spare (2 of 2 slots)
- Sliger CerberusFits110 mm of length to spare
Other RX 9060 XT cards in the Meshroom S
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.