Every card in the Meshroom S
Will it fit
Does the PowerColor Hellhound Radeon RX 9060 XT 16GB fit in the SSUPD Meshroom S V2?
Fits
Yes. The PowerColor Hellhound Radeon RX 9060 XT 16GB fits the SSUPD Meshroom S V2 with 23 mm of length to spare.
Length330 of 353 mm23 mm spare
Height120 of 153 mm33 mm spare
Thickness40 of 63 mm23 mm spare
Exact measurements
| Size | PowerColor | Meshroom S | Room |
|---|---|---|---|
| Length | 330 mm | 353 mm | 23 mm spare |
| Height | 120 mm | 153 mm | 33 mm spare |
| Thickness | 40 mm | 63 mm | 23 mm spare |
Rear position, 3-slot mode, extra feet fitted, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Hellhound Radeon RX 9060 XT 16GB fit in the SSUPD Meshroom S V2?
- Yes. The PowerColor Hellhound Radeon RX 9060 XT 16GB fits the SSUPD Meshroom S V2 with 23 mm of length to spare. Length 330 of 353 mm, height 120 of 153 mm, thickness 40 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, extra feet fitted, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 330 x 120 x 40 mm with the bracket and 310 x 100 x 40 mm without; we use the larger figures.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PTightNo length to spare (330 of 330 mm)
- Cooler Master NR200P V2Fits27 mm of length to spare
- FormD T1 V2.5Doesn’t fit5 mm too long
- Fractal Design Era 2Doesn’t fit4 mm too long
- Fractal Design RidgeTightOnly 5 mm of length to spare
- Fractal Design TerraDoesn’t fit8 mm too long
- Jonsbo Z20Fits33 mm of length to spare
- Lian Li A3-mATXFits85 mm of length to spare
- Lian Li A4-H2ODoesn’t fit8 mm too long
- Lian Li Q58Doesn’t fit10 mm too long
- NCASE M1 V6.1Doesn’t fit8 mm too long
- NCASE M2Fits29 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit6 mm too long
- SilverStone SG13Doesn’t fit60 mm too long
- Sliger CerberusTightNo length to spare (330 of 330 mm)
Other RX 9060 XT cards in the Meshroom S
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.