Every card in the A3-mATX
Will it fit
Does the PowerColor Hellhound Radeon RX 9060 XT 16GB fit in the Lian Li A3-mATX?
Fits
Yes. The PowerColor Hellhound Radeon RX 9060 XT 16GB fits the Lian Li A3-mATX with 85 mm of length to spare.
Length330 of 415 mm85 mm spare
Height120 mmNot published
Thickness2 of 4 slots2 slots spare
Exact measurements
| Size | PowerColor | A3-mATX | Room |
|---|---|---|---|
| Length | 330 mm | 415 mm | 85 mm spare |
| Height | 120 mm | — | Not published |
| Thickness | 2 slots | 4 slots | 2 slots spare |
Lian Li's published spec
Rather have it built?
We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Hellhound Radeon RX 9060 XT 16GB fit in the Lian Li A3-mATX?
- Yes. The PowerColor Hellhound Radeon RX 9060 XT 16GB fits the Lian Li A3-mATX with 85 mm of length to spare. Length 330 of 415 mm, height 120 mm (no published limit), thickness 2 of 4 slots.
- Is anything not checked?
- Lian Li doesn't publish a height limit for the A3-mATX, so that isn't checked.
- Where do these numbers come from?
- Lian Li's published spec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Lian Li’s A3-mATX specifications, checked October 24, 2026. Lian Li lists cards up to 415 mm long and 4 slots thick.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 330 x 120 x 40 mm with the bracket and 310 x 100 x 40 mm without; we use the larger figures.
- A 25 mm fan under the card limits it to 61 mm (3 slots); a bottom radiator with fans leaves no room for a card.
This card in other small cases
- Cooler Master NR200PTightNo length to spare (330 of 330 mm)
- Cooler Master NR200P V2Fits27 mm of length to spare
- FormD T1 V2.5Doesn’t fit5 mm too long
- Fractal Design Era 2Doesn’t fit4 mm too long
- Fractal Design RidgeTightOnly 5 mm of length to spare
- Fractal Design TerraDoesn’t fit8 mm too long
- Jonsbo Z20Fits33 mm of length to spare
- Lian Li A4-H2ODoesn’t fit8 mm too long
- Lian Li Q58Doesn’t fit10 mm too long
- NCASE M1 V6.1Doesn’t fit8 mm too long
- NCASE M2Fits29 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit6 mm too long
- SilverStone SG13Doesn’t fit60 mm too long
- Sliger CerberusTightNo length to spare (330 of 330 mm)
- SSUPD Meshroom S V2Fits23 mm of length to spare
Other RX 9060 XT cards in the A3-mATX
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.