Every card in the NR200P V2
Will it fit
Does the PowerColor Hellhound Radeon RX 9060 XT 16GB fit in the Cooler Master NR200P V2?
Fits
Yes. The PowerColor Hellhound Radeon RX 9060 XT 16GB fits the Cooler Master NR200P V2 with 27 mm of length to spare.
Length330 of 357 mm27 mm spare
Height120 of 160 mm40 mm spare
Thickness40 of 73 mm33 mm spare
Exact measurements
| Size | PowerColor | NR200P V2 | Room |
|---|---|---|---|
| Length | 330 mm | 357 mm | 27 mm spare |
| Height | 120 mm | 160 mm | 40 mm spare |
| Thickness | 40 mm | 73 mm | 33 mm spare |
Card running past the front bracket, leaving 67 mm for the CPU cooler.
Cooler Master's published spec, not yet measured by Respec
Rather have it built?
We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the PowerColor Hellhound Radeon RX 9060 XT 16GB fit in the Cooler Master NR200P V2?
- Yes. The PowerColor Hellhound Radeon RX 9060 XT 16GB fits the Cooler Master NR200P V2 with 27 mm of length to spare. Length 330 of 357 mm, height 120 of 160 mm, thickness 40 of 73 mm.
- Which NR200P V2 layout does it need?
- Card running past the front bracket, which leaves 67 mm for the CPU cooler.
- Where do these numbers come from?
- Cooler Master's published spec, not yet measured by Respec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
- Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 330 x 120 x 40 mm with the bracket and 310 x 100 x 40 mm without; we use the larger figures.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
This card in other small cases
- Cooler Master NR200PTightNo length to spare (330 of 330 mm)
- FormD T1 V2.5Doesn’t fit5 mm too long
- Fractal Design Era 2Doesn’t fit4 mm too long
- Fractal Design RidgeTightOnly 5 mm of length to spare
- Fractal Design TerraDoesn’t fit8 mm too long
- Jonsbo Z20Fits33 mm of length to spare
- Lian Li A3-mATXFits85 mm of length to spare
- Lian Li A4-H2ODoesn’t fit8 mm too long
- Lian Li Q58Doesn’t fit10 mm too long
- NCASE M1 V6.1Doesn’t fit8 mm too long
- NCASE M2Fits29 mm of length to spare
- Phanteks Evolv Shift XTDoesn’t fit6 mm too long
- SilverStone SG13Doesn’t fit60 mm too long
- Sliger CerberusTightNo length to spare (330 of 330 mm)
- SSUPD Meshroom S V2Fits23 mm of length to spare
Other RX 9060 XT cards in the NR200P V2
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.