Which NR200P V2 layout does it need?

Card inside the front bracket, which leaves 67 mm for the CPU cooler.

Where do these numbers come from?

Cooler Master's published spec, not yet measured by Respec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Every card in the NR200P V2

Will it fit

Does the PowerColor Reaper Radeon RX 9060 XT 16GB fit in the Cooler Master NR200P V2?

Fits

Yes. The PowerColor Reaper Radeon RX 9060 XT 16GB fits the Cooler Master NR200P V2 with 114 mm of length to spare.

Length220 of 334 mm114 mm spare

Height120 of 160 mm40 mm spare

Thickness40 of 80 mm40 mm spare

Exact measurements

Size	PowerColor	NR200P V2	Room
Length	220 mm	334 mm	114 mm spare
Height	120 mm	160 mm	40 mm spare
Thickness	40 mm	80 mm	40 mm spare

Card inside the front bracket, leaving 67 mm for the CPU cooler.

Cooler Master's published spec, not yet measured by Respec

Rather have it built?

We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the PowerColor Reaper Radeon RX 9060 XT 16GB fit in the Cooler Master NR200P V2?: Yes. The PowerColor Reaper Radeon RX 9060 XT 16GB fits the Cooler Master NR200P V2 with 114 mm of length to spare. Length 220 of 334 mm, height 120 of 160 mm, thickness 40 of 80 mm.
Which NR200P V2 layout does it need?: Card inside the front bracket, which leaves 67 mm for the CPU cooler.
Where do these numbers come from?: Cooler Master's published spec, not yet measured by Respec; card size from PowerColor's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
Card: PowerColor’s spec page, checked October 23, 2026. PowerColor lists 220 x 120 x 40 mm with the bracket and 200 x 100 x 39 mm without; we use the larger figures.
Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.

This card in other small cases

The card’s size, and all 25 cases

Other RX 9060 XT cards in the NR200P V2

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.