Every card in the T1
Will it fit
Does the Gigabyte Radeon RX 9060 XT Gaming OC 16G fit in the FormD T1 V2.5?
Fits
Yes. The Gigabyte Radeon RX 9060 XT Gaming OC 16G fits the FormD T1 V2.5 with 44 mm of length to spare.
Length281 of 325 mm44 mm spare
Height118 of 140 mm22 mm spare
Thickness≈1.97 of 2.25 slots0.28 slots spare
Exact measurements
| Size | Gigabyte | T1 | Room |
|---|---|---|---|
| Length | 281 mm | 325 mm | 44 mm spare |
| Height | 118 mm | 140 mm | 22 mm spare |
| Thickness | ≈1.97 slots | 2.25 slots | 0.28 slots spare |
Set for a 2.25-slot card, leaving 68 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte Radeon RX 9060 XT Gaming OC 16G fit in the FormD T1 V2.5?
- Yes. The Gigabyte Radeon RX 9060 XT Gaming OC 16G fits the FormD T1 V2.5 with 44 mm of length to spare. Length 281 of 325 mm, height 118 of 140 mm, thickness ≈1.97 of 2.25 slots.
- Which T1 layout does it need?
- Set for a 2.25-slot card, which leaves 68 mm for the CPU cooler.
- Where do these numbers come from?
- NCASE's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PFits49 mm of length to spare
- Cooler Master NR200P V2Fits53 mm of length to spare
- Fractal Design Era 2Fits45 mm of length to spare
- Fractal Design RidgeFits54 mm of length to spare
- Fractal Design TerraFits41 mm of length to spare
- Jonsbo Z20Fits82 mm of length to spare
- Lian Li A3-mATXFits134 mm of length to spare
- Lian Li A4-H2OFits41 mm of length to spare
- Lian Li Q58Fits39 mm of length to spare
- NCASE M1 V6.1Fits41 mm of length to spare
- NCASE M2Fits78 mm of length to spare
- Phanteks Evolv Shift XTFits43 mm of length to spare
- SilverStone SG13Doesn’t fit11 mm too long
- Sliger CerberusFits49 mm of length to spare
- SSUPD Meshroom S V2Fits51 mm of length to spare
Other RX 9060 XT cards in the T1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.