Every card in the NR200P V2
Will it fit
Does the MSI GeForce RTX 5070 Ti 16G Ventus 3X OC fit in the Cooler Master NR200P V2?
Fits
Yes. The MSI GeForce RTX 5070 Ti 16G Ventus 3X OC fits the Cooler Master NR200P V2 with 31 mm of length to spare.
Length303 of 334 mm31 mm spare
Height121 of 160 mm39 mm spare
Thickness49 of 80 mm31 mm spare
Exact measurements
| Size | MSI | NR200P V2 | Room |
|---|---|---|---|
| Length | 303 mm | 334 mm | 31 mm spare |
| Height | 121 mm | 160 mm | 39 mm spare |
| Thickness | 49 mm | 80 mm | 31 mm spare |
Card inside the front bracket, leaving 67 mm for the CPU cooler.
Cooler Master's published spec, not yet measured by Respec
Rather have it built?
We build the RTX 5070 Ti into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the MSI GeForce RTX 5070 Ti 16G Ventus 3X OC fit in the Cooler Master NR200P V2?
- Yes. The MSI GeForce RTX 5070 Ti 16G Ventus 3X OC fits the Cooler Master NR200P V2 with 31 mm of length to spare. Length 303 of 334 mm, height 121 of 160 mm, thickness 49 of 80 mm.
- Which NR200P V2 layout does it need?
- Card inside the front bracket, which leaves 67 mm for the CPU cooler.
- Where do these numbers come from?
- Cooler Master's published spec, not yet measured by Respec; card size from MSI's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
- Card: MSI’s spec page, checked October 23, 2026.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
This card in other small cases
- Cooler Master NR200PFits27 mm of length to spare
- FormD T1 V2.5Fits22 mm of length to spare
- Fractal Design Era 2Fits23 mm of length to spare
- Fractal Design RidgeTightOnly 4 mm of height to spare
- Fractal Design TerraFits19 mm of length to spare
- Jonsbo Z20Fits60 mm of length to spare
- Lian Li A3-mATXFits112 mm of length to spare
- Lian Li A4-H2OFits19 mm of length to spare
- Lian Li Q58Fits17 mm of length to spare
- NCASE M1 V6.1Doesn’t fitOnly 4 mm of height to spare
- NCASE M2Fits56 mm of length to spare
- Phanteks Evolv Shift XTFits21 mm of length to spare
- SilverStone SG13Doesn’t fit33 mm too long
- Sliger CerberusFits27 mm of length to spare
- SSUPD Meshroom S V2Fits29 mm of length to spare
Other RTX 5070 Ti cards in the NR200P V2
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.