Every card in the M1
Will it fit
Does the MSI GeForce RTX 5070 Ti 16G Ventus 3X OC fit in the NCASE M1 V6.1?
Doesn’t fit
No. The MSI GeForce RTX 5070 Ti 16G Ventus 3X OC is only 4 mm of height to spare and 4 mm too thick for the NCASE M1 V6.1.
Length303 of 322 mm19 mm spare
Height121 of 125 mm4 mm spare
Thickness49 of 45 mm4 mm over
Exact measurements
| Size | MSI | M1 | Room |
|---|---|---|---|
| Length | 303 mm | 322 mm | 19 mm spare |
| Height | 121 mm | 125 mm | 4 mm spare |
| Thickness | 49 mm | 45 mm | 4 mm over |
NCASE's published spec
Rather have it built?
We build the RTX 5070 Ti into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the MSI GeForce RTX 5070 Ti 16G Ventus 3X OC fit in the NCASE M1 V6.1?
- No. The MSI GeForce RTX 5070 Ti 16G Ventus 3X OC is only 4 mm of height to spare and 4 mm too thick for the NCASE M1 V6.1. Length 303 of 322 mm, height 121 of 125 mm, thickness 49 of 45 mm.
- Where do these numbers come from?
- NCASE's published spec; card size from MSI's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s M1 specifications, checked October 24, 2026. NCASE lists 280 mm for cards up to 60 mm (3 slots) thick, 290 mm with the front I/O ports removed, and 322 mm for cards up to 45 mm (2.2 slots). Height is 140 mm mid-card, 130 mm at the back corner and 125 mm past 280 mm of length; we use the corner figures.
- Card: MSI’s spec page, checked October 23, 2026.
- NCASE asks for 15 to 20 mm above the card for PCIe power connectors.
- A 25 mm bottom fan limits the card to 2 slots (42 mm); a 15 mm fan to 2.5 slots (50 mm).
This card in other small cases
- Cooler Master NR200PFits27 mm of length to spare
- Cooler Master NR200P V2Fits31 mm of length to spare
- FormD T1 V2.5Fits22 mm of length to spare
- Fractal Design Era 2Fits23 mm of length to spare
- Fractal Design RidgeTightOnly 4 mm of height to spare
- Fractal Design TerraFits19 mm of length to spare
- Jonsbo Z20Fits60 mm of length to spare
- Lian Li A3-mATXFits112 mm of length to spare
- Lian Li A4-H2OFits19 mm of length to spare
- Lian Li Q58Fits17 mm of length to spare
- NCASE M2Fits56 mm of length to spare
- Phanteks Evolv Shift XTFits21 mm of length to spare
- SilverStone SG13Doesn’t fit33 mm too long
- Sliger CerberusFits27 mm of length to spare
- SSUPD Meshroom S V2Fits29 mm of length to spare
Other RTX 5070 Ti cards in the M1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.