Every card in the T1
Will it fit
Does the ASUS Dual GeForce RTX 5060 Ti 16GB OC fit in the FormD T1 V2.5?
Fits
Yes. The ASUS Dual GeForce RTX 5060 Ti 16GB OC fits the FormD T1 V2.5 with 96 mm of length to spare.
Length229 of 325 mm96 mm spare
Height120 of 140 mm20 mm spare
Thickness2.5 of 2.75 slots0.25 slots spare
Exact measurements
| Size | ASUS | T1 | Room |
|---|---|---|---|
| Length | 229 mm | 325 mm | 96 mm spare |
| Height | 120 mm | 140 mm | 20 mm spare |
| Thickness | 2.5 slots | 2.75 slots | 0.25 slots spare |
Set for a 2.75-slot card, leaving 58 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RTX 5060 Ti into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the ASUS Dual GeForce RTX 5060 Ti 16GB OC fit in the FormD T1 V2.5?
- Yes. The ASUS Dual GeForce RTX 5060 Ti 16GB OC fits the FormD T1 V2.5 with 96 mm of length to spare. Length 229 of 325 mm, height 120 of 140 mm, thickness 2.5 of 2.75 slots.
- Which T1 layout does it need?
- Set for a 2.75-slot card, which leaves 58 mm for the CPU cooler.
- Where do these numbers come from?
- NCASE's published spec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: ASUS’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PFits101 mm of length to spare
- Cooler Master NR200P V2Fits105 mm of length to spare
- Fractal Design Era 2Fits97 mm of length to spare
- Fractal Design RidgeFits106 mm of length to spare
- Fractal Design TerraFits93 mm of length to spare
- Jonsbo Z20Fits134 mm of length to spare
- Lian Li A3-mATXFits186 mm of length to spare
- Lian Li A4-H2OFits93 mm of length to spare
- Lian Li Q58Fits91 mm of length to spare
- NCASE M1 V6.1Fits51 mm of length to spare
- NCASE M2Fits130 mm of length to spare
- Phanteks Evolv Shift XTFits95 mm of length to spare
- SilverStone SG13Doesn’t fit0.5 slots too thick
- Sliger CerberusFits101 mm of length to spare
- SSUPD Meshroom S V2Fits103 mm of length to spare
Other RTX 5060 Ti cards in the T1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.