Is anything not checked?

Sliger doesn't publish a thickness limit for the Cerberus, so that isn't checked.

Where do these numbers come from?

Sliger's published spec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Every card in the Cerberus

Will it fit

Does the ASUS Dual GeForce RTX 5060 Ti 16GB OC fit in the Sliger Cerberus?

Fits

Yes. The ASUS Dual GeForce RTX 5060 Ti 16GB OC fits the Sliger Cerberus with 101 mm of length to spare.

Length229 of 330 mm101 mm spare

Height120 of 150 mm30 mm spare

Thickness2.5 slotsNot published

Exact measurements

Size	ASUS	Cerberus	Room
Length	229 mm	330 mm	101 mm spare
Height	120 mm	150 mm	30 mm spare
Thickness	2.5 slots	—	Not published

Sliger's published spec

Rather have it built?

We build the RTX 5060 Ti into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the ASUS Dual GeForce RTX 5060 Ti 16GB OC fit in the Sliger Cerberus?: Yes. The ASUS Dual GeForce RTX 5060 Ti 16GB OC fits the Sliger Cerberus with 101 mm of length to spare. Length 229 of 330 mm, height 120 of 150 mm, thickness 2.5 slots (no published limit).
Is anything not checked?: Sliger doesn't publish a thickness limit for the Cerberus, so that isn't checked.
Where do these numbers come from?: Sliger's published spec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

Case: Sliger’s Cerberus specifications, checked October 24, 2026. Sliger lists cards up to 330 mm long and 150 mm tall in five expansion slots.
Card: ASUS’s spec page, checked October 23, 2026.
Sliger discontinued the Cerberus on July 31, 2025.

This card in other small cases

The card’s size, and all 25 cases

Other RTX 5060 Ti cards in the Cerberus

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.