Every card in the T1
Will it fit
Does the Gigabyte GeForce RTX 5060 Ti Windforce OC 16G fit in the FormD T1 V2.5?
Fits
Yes. The Gigabyte GeForce RTX 5060 Ti Windforce OC 16G fits the FormD T1 V2.5 with 117 mm of length to spare.
Length208 of 325 mm117 mm spare
Height120 of 140 mm20 mm spare
Thickness≈1.97 of 2.25 slots0.28 slots spare
Exact measurements
| Size | Gigabyte | T1 | Room |
|---|---|---|---|
| Length | 208 mm | 325 mm | 117 mm spare |
| Height | 120 mm | 140 mm | 20 mm spare |
| Thickness | ≈1.97 slots | 2.25 slots | 0.28 slots spare |
Set for a 2.25-slot card, leaving 68 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RTX 5060 Ti into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte GeForce RTX 5060 Ti Windforce OC 16G fit in the FormD T1 V2.5?
- Yes. The Gigabyte GeForce RTX 5060 Ti Windforce OC 16G fits the FormD T1 V2.5 with 117 mm of length to spare. Length 208 of 325 mm, height 120 of 140 mm, thickness ≈1.97 of 2.25 slots.
- Which T1 layout does it need?
- Set for a 2.25-slot card, which leaves 68 mm for the CPU cooler.
- Where do these numbers come from?
- NCASE's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PFits122 mm of length to spare
- Cooler Master NR200P V2Fits126 mm of length to spare
- Fractal Design Era 2Fits118 mm of length to spare
- Fractal Design RidgeFits127 mm of length to spare
- Fractal Design TerraFits114 mm of length to spare
- Jonsbo Z20Fits155 mm of length to spare
- Lian Li A3-mATXFits207 mm of length to spare
- Lian Li A4-H2OFits114 mm of length to spare
- Lian Li Q58Fits112 mm of length to spare
- NCASE M1 V6.1Fits72 mm of length to spare
- NCASE M2Fits151 mm of length to spare
- Phanteks Evolv Shift XTFits116 mm of length to spare
- SilverStone SG13TightOnly 0.03 slots of thickness to spare
- Sliger CerberusFits122 mm of length to spare
- SSUPD Meshroom S V2Fits124 mm of length to spare
Other RTX 5060 Ti cards in the T1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.