Every card in the Meshroom S
Will it fit
Does the NVIDIA GeForce RTX 5080 Founders Edition fit in the SSUPD Meshroom S V2?
Fits
Yes. The NVIDIA GeForce RTX 5080 Founders Edition fits the SSUPD Meshroom S V2 with 28 mm of length to spare.
Length304 of 332 mm28 mm spare
Height137 of 153 mm16 mm spare
Thickness≈40.6 of 63 mm22.4 mm spare
Exact measurements
| Size | NVIDIA | Meshroom S | Room |
|---|---|---|---|
| Length | 304 mm | 332 mm | 28 mm spare |
| Height | 137 mm | 153 mm | 16 mm spare |
| Thickness | ≈40.6 mm | 63 mm | 22.4 mm spare |
Rear position, 3-slot mode, leaving 74 mm for the CPU cooler.
SSUPD's published spec
Rather have it built?
We build the RTX 5080 into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the NVIDIA GeForce RTX 5080 Founders Edition fit in the SSUPD Meshroom S V2?
- Yes. The NVIDIA GeForce RTX 5080 Founders Edition fits the SSUPD Meshroom S V2 with 28 mm of length to spare. Length 304 of 332 mm, height 137 of 153 mm, thickness ≈40.6 of 63 mm.
- Which Meshroom S layout does it need?
- Rear position, 3-slot mode, which leaves 74 mm for the CPU cooler.
- Where do these numbers come from?
- SSUPD's published spec; card size from NVIDIA's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: NVIDIA’s spec page, checked October 23, 2026. NVIDIA publishes the slot count, not a thickness in millimetres, and asks for room for a 3-slot (61 mm) card for airflow.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PFits26 mm of length to spare
- Cooler Master NR200P V2Fits30 mm of length to spare
- FormD T1 V2.5TightOnly 3 mm of height to spare
- Fractal Design Era 2TightNo height to spare (137 of 137 mm)
- Fractal Design RidgeDoesn’t fit12 mm too tall
- Fractal Design TerraFits18 mm of length to spare
- Jonsbo Z20Fits59 mm of length to spare
- Lian Li A3-mATXFits111 mm of length to spare
- Lian Li A4-H2OFits18 mm of length to spare
- Lian Li Q58Fits16 mm of length to spare
- NCASE M1 V6.1Doesn’t fit12 mm too tall
- NCASE M2Fits55 mm of length to spare
- Phanteks Evolv Shift XTFits20 mm of length to spare
- SilverStone SG13Doesn’t fit34 mm too long
- Sliger CerberusFits26 mm of length to spare
Other RTX 5080 cards in the Meshroom S
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.