Every card in the NR200P V2
Will it fit
Does the NVIDIA GeForce RTX 5080 Founders Edition fit in the Cooler Master NR200P V2?
Fits
Yes. The NVIDIA GeForce RTX 5080 Founders Edition fits the Cooler Master NR200P V2 with 30 mm of length to spare.
Length304 of 334 mm30 mm spare
Height137 of 160 mm23 mm spare
Thickness≈40.6 of 80 mm39.4 mm spare
Exact measurements
| Size | NVIDIA | NR200P V2 | Room |
|---|---|---|---|
| Length | 304 mm | 334 mm | 30 mm spare |
| Height | 137 mm | 160 mm | 23 mm spare |
| Thickness | ≈40.6 mm | 80 mm | 39.4 mm spare |
Card inside the front bracket, leaving 67 mm for the CPU cooler.
Cooler Master's published spec, not yet measured by Respec
Rather have it built?
We build the RTX 5080 into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the NVIDIA GeForce RTX 5080 Founders Edition fit in the Cooler Master NR200P V2?
- Yes. The NVIDIA GeForce RTX 5080 Founders Edition fits the Cooler Master NR200P V2 with 30 mm of length to spare. Length 304 of 334 mm, height 137 of 160 mm, thickness ≈40.6 of 80 mm.
- Which NR200P V2 layout does it need?
- Card inside the front bracket, which leaves 67 mm for the CPU cooler.
- Where do these numbers come from?
- Cooler Master's published spec, not yet measured by Respec; card size from NVIDIA's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
- Card: NVIDIA’s spec page, checked October 23, 2026. NVIDIA publishes the slot count, not a thickness in millimetres, and asks for room for a 3-slot (61 mm) card for airflow.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
This card in other small cases
- Cooler Master NR200PFits26 mm of length to spare
- FormD T1 V2.5TightOnly 3 mm of height to spare
- Fractal Design Era 2TightNo height to spare (137 of 137 mm)
- Fractal Design RidgeDoesn’t fit12 mm too tall
- Fractal Design TerraFits18 mm of length to spare
- Jonsbo Z20Fits59 mm of length to spare
- Lian Li A3-mATXFits111 mm of length to spare
- Lian Li A4-H2OFits18 mm of length to spare
- Lian Li Q58Fits16 mm of length to spare
- NCASE M1 V6.1Doesn’t fit12 mm too tall
- NCASE M2Fits55 mm of length to spare
- Phanteks Evolv Shift XTFits20 mm of length to spare
- SilverStone SG13Doesn’t fit34 mm too long
- Sliger CerberusFits26 mm of length to spare
- SSUPD Meshroom S V2Fits28 mm of length to spare
Other RTX 5080 cards in the NR200P V2
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.