Every card in the Meshroom S
Will it fit
Does the Gigabyte GeForce RTX 5090 Gaming OC 32G fit in the SSUPD Meshroom S V2?
Tight
Yes, but it's tight: only 1 mm of height to spare; the 4-slot mode leaves 54 mm for the CPU cooler (low-profile coolers only).
Length342 of 353 mm11 mm spare
Height152 of 153 mm1 mm spare
Thickness70 of 82 mm12 mm spare
Exact measurements
| Size | Gigabyte | Meshroom S | Room |
|---|---|---|---|
| Length | 342 mm | 353 mm | 11 mm spare |
| Height | 152 mm | 153 mm | 1 mm spare |
| Thickness | 70 mm | 82 mm | 12 mm spare |
Rear position, 4-slot mode, extra feet fitted, leaving 54 mm for the CPU cooler.
SSUPD's published spec
Questions
- Does the Gigabyte GeForce RTX 5090 Gaming OC 32G fit in the SSUPD Meshroom S V2?
- Yes, but it's tight: only 1 mm of height to spare; the 4-slot mode leaves 54 mm for the CPU cooler (low-profile coolers only). Length 342 of 353 mm, height 152 of 153 mm, thickness 70 of 82 mm.
- Which Meshroom S layout does it need?
- The 4-slot mode leaves 54 mm for the CPU cooler (low-profile coolers only).
- Where do these numbers come from?
- SSUPD's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: SSUPD’s Meshroom S specifications, checked October 24, 2026. SSUPD lists the rear GPU position at 332 x 153 mm with 63 mm (3-slot mode) or 82 mm (4-slot mode) of thickness, and 353 mm of length with the extra feet fitted.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- In 4-slot mode the CPU cooler drops from 74 mm to 54 mm.
- An ATX power supply can cut the room for the card, depending on the build.
This card in other small cases
- Cooler Master NR200PDoesn’t fit12 mm too long
- Cooler Master NR200P V2Fits15 mm of length to spare
- FormD T1 V2.5Doesn’t fit17 mm too long
- Fractal Design Era 2Doesn’t fit16 mm too long
- Fractal Design RidgeDoesn’t fit7 mm too long
- Fractal Design TerraDoesn’t fit20 mm too long
- Jonsbo Z20Fits21 mm of length to spare
- Lian Li A3-mATXFits73 mm of length to spare
- Lian Li A4-H2ODoesn’t fit20 mm too long
- Lian Li Q58Doesn’t fit22 mm too long
- NCASE M1 V6.1Doesn’t fit20 mm too long
- NCASE M2TightOnly in the vertical-GPU layout, which limits the CPU cooler to 50 mm (70 mm with a 3-slot card) and needs an SFX or SFX-L power supply
- Phanteks Evolv Shift XTDoesn’t fit18 mm too long
- SilverStone SG13Doesn’t fit72 mm too long
- Sliger CerberusDoesn’t fit12 mm too long
Other RTX 5090 cards in the Meshroom S
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.