Every card in the T1
Will it fit
Does the Gigabyte GeForce RTX 5090 Gaming OC 32G fit in the FormD T1 V2.5?
Doesn’t fit
No. The Gigabyte GeForce RTX 5090 Gaming OC 32G is 17 mm too long and 12 mm too tall and 0.19 slots too thick for the FormD T1 V2.5.
Length342 of 325 mm17 mm over
Height152 of 140 mm12 mm over
Thickness≈3.44 of 3.25 slots0.19 slots over
Exact measurements
| Size | Gigabyte | T1 | Room |
|---|---|---|---|
| Length | 342 mm | 325 mm | 17 mm over |
| Height | 152 mm | 140 mm | 12 mm over |
| Thickness | ≈3.44 slots | 3.25 slots | 0.19 slots over |
NCASE's published spec
Questions
- Does the Gigabyte GeForce RTX 5090 Gaming OC 32G fit in the FormD T1 V2.5?
- No. The Gigabyte GeForce RTX 5090 Gaming OC 32G is 17 mm too long and 12 mm too tall and 0.19 slots too thick for the FormD T1 V2.5. Length 342 of 325 mm, height 152 of 140 mm, thickness ≈3.44 of 3.25 slots.
- Where do these numbers come from?
- NCASE's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PDoesn’t fit12 mm too long
- Cooler Master NR200P V2Fits15 mm of length to spare
- Fractal Design Era 2Doesn’t fit16 mm too long
- Fractal Design RidgeDoesn’t fit7 mm too long
- Fractal Design TerraDoesn’t fit20 mm too long
- Jonsbo Z20Fits21 mm of length to spare
- Lian Li A3-mATXFits73 mm of length to spare
- Lian Li A4-H2ODoesn’t fit20 mm too long
- Lian Li Q58Doesn’t fit22 mm too long
- NCASE M1 V6.1Doesn’t fit20 mm too long
- NCASE M2TightOnly in the vertical-GPU layout, which limits the CPU cooler to 50 mm (70 mm with a 3-slot card) and needs an SFX or SFX-L power supply
- Phanteks Evolv Shift XTDoesn’t fit18 mm too long
- SilverStone SG13Doesn’t fit72 mm too long
- Sliger CerberusDoesn’t fit12 mm too long
- SSUPD Meshroom S V2TightOnly 1 mm of height to spare
Other RTX 5090 cards in the T1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.