Every card in the M1
Will it fit
Does the MSI GeForce RTX 5070 12G Ventus 2X OC fit in the NCASE M1 V6.1?
Tight
Yes, but it's tight: only 4 mm of height to spare.
Length236 of 280 mm44 mm spare
Height126 of 130 mm4 mm spare
Thickness50 of 60 mm10 mm spare
Exact measurements
| Size | MSI | M1 | Room |
|---|---|---|---|
| Length | 236 mm | 280 mm | 44 mm spare |
| Height | 126 mm | 130 mm | 4 mm spare |
| Thickness | 50 mm | 60 mm | 10 mm spare |
Card up to 3 slots, leaving 130 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RTX 5070 into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the MSI GeForce RTX 5070 12G Ventus 2X OC fit in the NCASE M1 V6.1?
- Yes, but it's tight: only 4 mm of height to spare. Length 236 of 280 mm, height 126 of 130 mm, thickness 50 of 60 mm.
- Which M1 layout does it need?
- Card up to 3 slots, which leaves 130 mm for the CPU cooler.
- Where do these numbers come from?
- NCASE's published spec; card size from MSI's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s M1 specifications, checked October 24, 2026. NCASE lists 280 mm for cards up to 60 mm (3 slots) thick, 290 mm with the front I/O ports removed, and 322 mm for cards up to 45 mm (2.2 slots). Height is 140 mm mid-card, 130 mm at the back corner and 125 mm past 280 mm of length; we use the corner figures.
- Card: MSI’s spec page, checked October 23, 2026.
- NCASE asks for 15 to 20 mm above the card for PCIe power connectors.
- A 25 mm bottom fan limits the card to 2 slots (42 mm); a 15 mm fan to 2.5 slots (50 mm).
This card in other small cases
- Cooler Master NR200PFits94 mm of length to spare
- Cooler Master NR200P V2Fits98 mm of length to spare
- FormD T1 V2.5Fits89 mm of length to spare
- Fractal Design Era 2Fits90 mm of length to spare
- Fractal Design RidgeDoesn’t fit1 mm too tall
- Fractal Design TerraFits86 mm of length to spare
- Jonsbo Z20Fits127 mm of length to spare
- Lian Li A3-mATXFits179 mm of length to spare
- Lian Li A4-H2OFits86 mm of length to spare
- Lian Li Q58Fits84 mm of length to spare
- NCASE M2Fits123 mm of length to spare
- Phanteks Evolv Shift XTFits88 mm of length to spare
- SilverStone SG13Doesn’t fitOnly 3 mm of height to spare
- Sliger CerberusFits94 mm of length to spare
- SSUPD Meshroom S V2Fits96 mm of length to spare
Other RTX 5070 cards in the M1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.