Every card in the T1
Will it fit
Does the Gigabyte GeForce RTX 5070 Windforce OC SFF 12G fit in the FormD T1 V2.5?
Fits
Yes. The Gigabyte GeForce RTX 5070 Windforce OC SFF 12G fits the FormD T1 V2.5 with 43 mm of length to spare.
Length282 of 325 mm43 mm spare
Height110 of 140 mm30 mm spare
Thickness≈2.46 of 2.75 slots0.29 slots spare
Exact measurements
| Size | Gigabyte | T1 | Room |
|---|---|---|---|
| Length | 282 mm | 325 mm | 43 mm spare |
| Height | 110 mm | 140 mm | 30 mm spare |
| Thickness | ≈2.46 slots | 2.75 slots | 0.29 slots spare |
Set for a 2.75-slot card, leaving 58 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RTX 5070 into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte GeForce RTX 5070 Windforce OC SFF 12G fit in the FormD T1 V2.5?
- Yes. The Gigabyte GeForce RTX 5070 Windforce OC SFF 12G fits the FormD T1 V2.5 with 43 mm of length to spare. Length 282 of 325 mm, height 110 of 140 mm, thickness ≈2.46 of 2.75 slots.
- Which T1 layout does it need?
- Set for a 2.75-slot card, which leaves 58 mm for the CPU cooler.
- Where do these numbers come from?
- NCASE's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PFits48 mm of length to spare
- Cooler Master NR200P V2Fits52 mm of length to spare
- Fractal Design Era 2Fits44 mm of length to spare
- Fractal Design RidgeFits53 mm of length to spare
- Fractal Design TerraFits40 mm of length to spare
- Jonsbo Z20Fits81 mm of length to spare
- Lian Li A3-mATXFits133 mm of length to spare
- Lian Li A4-H2OFits40 mm of length to spare
- Lian Li Q58Fits38 mm of length to spare
- NCASE M1 V6.1TightOnly 8 mm of length to spare
- NCASE M2Fits77 mm of length to spare
- Phanteks Evolv Shift XTFits42 mm of length to spare
- SilverStone SG13Doesn’t fit12 mm too long
- Sliger CerberusFits48 mm of length to spare
- SSUPD Meshroom S V2Fits50 mm of length to spare
Other RTX 5070 cards in the T1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.