Is anything not checked?

Phanteks doesn't publish a height or thickness limit for the XT Pro, so those aren't checked.

Where do these numbers come from?

Phanteks's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Every card in the XT Pro

Will it fit

Does the Sapphire Pulse Radeon RX 9060 XT 16GB OC fit in the Phanteks XT Pro?

Fits

Yes. The Sapphire Pulse Radeon RX 9060 XT 16GB OC fits the Phanteks XT Pro with 175 mm of length to spare.

Length240 of 415 mm175 mm spare

Height111.3 mmNot published

Thickness2.3 slotsNot published

Exact measurements

Size	Sapphire	XT Pro	Room
Length	240 mm	415 mm	175 mm spare
Height	111.3 mm	—	Not published
Thickness	2.3 slots	—	Not published

Phanteks's published spec

Rather have it built?

We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.

Questions

Does the Sapphire Pulse Radeon RX 9060 XT 16GB OC fit in the Phanteks XT Pro?: Yes. The Sapphire Pulse Radeon RX 9060 XT 16GB OC fits the Phanteks XT Pro with 175 mm of length to spare. Length 240 of 415 mm, height 111.3 mm (no published limit), thickness 2.3 slots (no published limit).
Is anything not checked?: Phanteks doesn't publish a height or thickness limit for the XT Pro, so those aren't checked.
Where do these numbers come from?: Phanteks's published spec; card size from Sapphire's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

Case: Phanteks’s XT Pro specifications, checked October 24, 2026. Phanteks lists a 415 mm length limit; no height or thickness limit.
Card: Sapphire’s spec page, checked October 23, 2026.

This card in other mid-towers

The card’s size, and all 25 cases

Other RX 9060 XT cards in the XT Pro

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.