Every card in the NR200P V2
Will it fit
Does the MSI GeForce RTX 5060 Ti 16G Gaming OC fit in the Cooler Master NR200P V2?
Fits
Yes. The MSI GeForce RTX 5060 Ti 16G Gaming OC fits the Cooler Master NR200P V2 with 87 mm of length to spare.
Length247 of 334 mm87 mm spare
Height135 of 160 mm25 mm spare
Thickness51 of 80 mm29 mm spare
Exact measurements
| Size | MSI | NR200P V2 | Room |
|---|---|---|---|
| Length | 247 mm | 334 mm | 87 mm spare |
| Height | 135 mm | 160 mm | 25 mm spare |
| Thickness | 51 mm | 80 mm | 29 mm spare |
Card inside the front bracket, leaving 67 mm for the CPU cooler.
Cooler Master's published spec, not yet measured by Respec
Rather have it built?
We build the RTX 5060 Ti into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the MSI GeForce RTX 5060 Ti 16G Gaming OC fit in the Cooler Master NR200P V2?
- Yes. The MSI GeForce RTX 5060 Ti 16G Gaming OC fits the Cooler Master NR200P V2 with 87 mm of length to spare. Length 247 of 334 mm, height 135 of 160 mm, thickness 51 of 80 mm.
- Which NR200P V2 layout does it need?
- Card inside the front bracket, which leaves 67 mm for the CPU cooler.
- Where do these numbers come from?
- Cooler Master's published spec, not yet measured by Respec; card size from MSI's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
- Card: MSI’s spec page, checked October 23, 2026.
- Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.
This card in other small cases
- Cooler Master NR200PFits83 mm of length to spare
- FormD T1 V2.5Fits78 mm of length to spare
- Fractal Design Era 2TightOnly 2 mm of height to spare
- Fractal Design RidgeDoesn’t fit10 mm too tall
- Fractal Design TerraTightOnly 2 mm of thickness to spare
- Jonsbo Z20Fits116 mm of length to spare
- Lian Li A3-mATXFits168 mm of length to spare
- Lian Li A4-H2OFits75 mm of length to spare
- Lian Li Q58Fits73 mm of length to spare
- NCASE M1 V6.1Doesn’t fit5 mm too tall
- NCASE M2Fits112 mm of length to spare
- Phanteks Evolv Shift XTFits77 mm of length to spare
- SilverStone SG13Doesn’t fit6 mm too tall
- Sliger CerberusFits83 mm of length to spare
- SSUPD Meshroom S V2Fits85 mm of length to spare
Other RTX 5060 Ti cards in the NR200P V2
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.